| Search Results |
 |
Loading Paper - CX-G2400
|
Loading Paper ... edge, and secure them in place ... For long sheets of paper (paper length of 157 mm or longer): You do not need to close the auxiliary tray. ... Paper length of 91 mm or less (business card, etc. ): Can be set up to the load limit mark (arrow) (B). Paper length of 157 mm or longer: Can be set up to the load limit mark (line) (C). If a paper feed error occurs, reduce the number of sheets loaded in the tray.
|
|
|
Printing Does not Start or Complete - CX-G6400
|
Did an error occur? ... protect the head, printing head, printing operations will be interrupted.
|
|
|
Operator Call Messages - CX-G2400
|
|
Replacing the Ink Tank CX-G6400
|
If an ink tank of a certain color is out of ink, the corresponding ink warning lamp lights up and an error message "xxxx ink empty" appears on the status monitor. The procedures for replacing the ink tank and checking the ink condition are described below.
|
|
|
Using the Status Monitor CX-G2400
|
An error message is displayed with the printer status, printing cannot be completed
|
|
|
Replacing the Maintenance Cartridge CX-G6400
|
Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing starts. Put the removed maintenance cartridge in the plastic bag.
|
|
|
Replacing the Ink Tank CX G2400
|
The Ink lamp lights up when the corresponding ink tank is out of ink. An error message “XXXX ink empty” appears on the status monitor. (XXXX: Black, Cyan, Magenta, or Yellow)
|
|
|
Using the Status Monitor
|
Using the Status Monitor An error message is displayed for the Status Information, and printing cannot be done in this status. Troubleshoot the problem as required.
|
|
|
Cleaning the Print Head - CX-G2400
|
IMPORTANT • When printing is in progress or an error has occurred, cleaning can not be carried out. • When cleaning is in progress, do not carry out any other operation.
|
|
|
Cleaning the Print Head - CX-G6400
|
During cleaning is in process, do not perform any other operation. Cleaning cannot be done during a print job or when an error is occurring. If strong cleaning fails to solve the problem, the print head may require replacement, or there could
|
|
