| Search Results |
 |
Operator Call Messages - CX-G2400
|
Operator Call Errors Error Message Error ... XXXX ink tank setting error ... error ... If the same error occurs, confirm the ... Feeder tray error ... Update error #**** ... Overlay data error Error with overlay printing data. ... Print head position error #**** ... Transport unit error #**** ... error ... 2 . Click [Install the printer driver]. ... Unknown error #**** An unknown error was returned. ... If the same error occurs again, take ... Printing with the ink level detection function disabled may damage the printer or cause errors .
|
|
|
Cleaning the Print Head - CX-G6400
|
Cleaning cannot be done during a print job or when an error is occurring. ... 2 Click the [Utility ... 2 . Select [Light Cleaning
|
|
|
Printing Does not Start or Complete - CX-G6400
|
Did an error occur? ... 2 ) Select Control Panel -> Hardware and Sound -> Devices and ... 2 . Right-click the printer icon and select [Printer Properties]. ... 2 . Confirm this computer's IP address. ... 2 )In the window started, enter "ipconfig/all". ... 2 ) Select Control Panel -> Hardware and Sound -> Devices and ... 2 . Right-click the printer icon and select [Printer Properties].
|
|
|
Using the Status Monitor
|
Using the Status Monitor ［ 2 ... Displayed when a error has been issued ... An error message is displayed for ... ... only when an error occurs. Operator Call Error ... These errors are issued for a problem that requires your attention. ... Service Call Error ... These errors are issued for problems that cannot be solved by the user. ... If the error occurs again after turning on the power again, make a note of the 4-digit error code , and contact your place of purchase. ... • If several errors occur at the same time, the most important error is displayed on the top of the list.
|
|
|
Replacing the Ink Tank CX-G6400
|
If an ink tank of a certain color is out of ink, the corresponding ink warning lamp lights up and an error message "xxxx ink empty" appears on the status monitor. The procedures for replacing the ink tank and checking the ink condition are described below.
|
|
|
Using the Status Monitor CX-G2400
|
An error message is displayed with the printer status, printing cannot be completed
|
|
|
Replacing the Maintenance Cartridge CX-G6400
|
Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing starts. Put the removed maintenance cartridge in the plastic bag.
|
|
|
Replacing the Ink Tank CX G2400
|
The Ink lamp lights up when the corresponding ink tank is out of ink. An error message “XXXX ink empty” appears on the status monitor. (XXXX: Black, Cyan, Magenta, or Yellow)
|
|
|
Loading Cards - IX-R7000
|
Loading Cards Cards can be loaded in two ways: using the card retainer, and using the card feeding slot.
|
|
|
Cleaning the Print Head - CX-G2400
|
IMPORTANT • When printing is in progress or an error has occurred, cleaning can not be carried out. • When cleaning is in progress, do not carry out any other operation.
|
|
