| Search Results |
 |
Understand printing errors in OSX 10.12 Sierra
|
Find solutions to printing errors specific to Macintosh OSX 10.12 Sierra including filter error and partial printing issues.
|
|
|
An Error Code Is Displayed on the LED - MG2120
|
Check if there is any foreign material inside the printer If foreign material such as jammed paper is inside the printer, the FINE cartridge cannot move properly, causing faulty printing or Error P, 0, 2. Check and remove any foreign material inside the printer, following the procedures below.
|
|
|
What to do when P, 0, 3 (6000) alternately flashes on the MG2120
|
When P, 0, 3 alternately flashes on the printer's LED, an issue requiring your attention has occurred on the printer. While this message flashes the power lamp and the error lamp of the main unit will alternately blink. When printing from the computer, error 6000 will appear on your computer's monitor.
|
|
|
Install software updates if you use macOS Sierra (10.12)
|
Possible issues A "filter error " is indicated and nothing prints . Printing stops partway through. Some portion of the printout is missing.
|
|
|
Reseat the ink cartridge(s) MG2120 / MG3120 / MG4120
|
When remaining ink cautions or errors occur, an error code will appear on the LED to inform you to replace the cartridge. Even when printing with one ink only, print with leaving the empty FINE cartridge installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print .
|
|
|
Installing ink cartridge(s) MG2120
|
Appropriate FINE cartridge is not installed.Install the appropriate FINE cartridge. Even when printing with one ink only, print with leaving the empty FINE cartridge installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print .
|
|
|
Initial Hardware Setup PIXMA MG2120
|
Printing without opening the Paper Output Tray causes an error .
|
|
|
Try Printing a Different Photo
|
Easy-PhotoPrint EX If there are error messages or the program shuts down when attempting to print a photo, try printing a different photo or a photo from a different source. If this new photo prints, the first photo may have become corrupted in some manner, causing the error.
|
|
|
Cleaning the Encoder Film MG2120
|
Cleaning the Encoder Film ID: 8201519800_ EN_ 1 Issue If vertical lines always appear on printouts or print always shifts from the correct position, or if Error P, 0, 2 occurs during printer operation, the Encoder Film inside the printer may be smeared. Follow the procedures below to check the film condition, and clean it when necessary.
|
|
|
Check the ink level and take appropriate action - MG2120
|
An illustration of the ink types and their status are displayed. If a warning or error related to the remaining ink level occurs, the print driver displays an icon to let you know. In such cases, take the appropriate action as described on the screen.
|
|
