| Search Results |
 |
Setting up the wireless printer after changing routers, router settings or networks (Windows)
|
Perform the following procedure to uninstall the MP drivers: page and search for your model. Then, click on the Wireless Help
|
|
|
Setup the MP990 for use over a wireless LAN (Windows)
|
Wireless Setup Step-by-step instruction is available on our Wireless Help page to assist you in setting up your printer on your network. Click the appropriate link(s) below for help.
|
|
|
Delete the printer from the list of printers then set up the printer for use over a wireless LAN
|
|
Use the IJ Network Tool to configure the connection (Mac)
|
Run the Canon IJ Network Tool screen, proceed to Step 7. 7. On the Accepts Points screen, select the Access Point to be used , enter the network password in the space provided and click Connect Wireless Help
|
|
|
Devices Which May Interfere with Wi-Fi Communication
|
Solution If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Setup the MP560 for use over a wireless LAN using Wi-Fi Protected Setup (WPS)
|
If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement Install the Software (Information)
|
|
|
Setting up the machine for use over a wireless LAN using WPS (Wifi Protected Setup) - MP640
|
If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement.
|
|
|
Setup the MP980 for use over a wireless LAN - Mac OS X with multiple Access Points and single SSID
|
Wireless LAN setup - Multiple Access Points, Single SSID 4. Select Change wireless / wired, then press the OK ... If you do not know your administrator name or password, click Help , then follow the on-screen instructions.
|
|
|
Setup the MP620 / MP620B for use over a wireless LAN - Mac OS X with multiple Access Points and single SSID
|
Wireless LAN setup - Multiple Access Points, Single SSID 4. Select Change wireless / wired, then press the OK ... If you do not know your administrator name or password, click Help , then follow the on-screen instructions.
|
|
|
"No AirPrint Printers Found" When Attempting to Print from an iOS or iPadOS Device (PIXMA / MAXIFY)
|
Please follow these steps to troubleshoot the issue: - Wi-Fi ... is connected to Wi-Fi : Tap Wi-Fi ... Make sure that Wi-Fi is enabled. ... cycling does not help : ... the printer and wireless router closer together ... ... be interfering with Wi-Fi communication ... the printer and wireless router. ... network or no Wi-Fi is available: If your mobile device and printer ... network, or Wi-Fi is unavailable, ... This feature allows your printer to send it's own signal to your mobile device without the use of a wireless router.
|
|
