| Search Results |
 |
Setting up the wireless printer after changing routers, router settings or networks (Windows)
|
Perform the following procedure to uninstall the MP drivers: page and search for your model. Then, click on the Wireless Help
|
|
|
Setup the MP990 for use over a wireless LAN (Windows)
|
Wireless Setup Step-by-step instruction is available on our Wireless Help page to assist you in setting up your printer on your network. Click the appropriate link(s) below for help.
|
|
|
Delete the printer from the list of printers then set up the printer for use over a wireless LAN
|
|
Use the IJ Network Tool to configure the connection (Mac)
|
Run the Canon IJ Network Tool screen, proceed to Step 7. 7. On the Accepts Points screen, select the Access Point to be used , enter the network password in the space provided and click Connect Wireless Help
|
|
|
Devices Which May Interfere with Wi-Fi Communication
|
Solution If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Setup the MP560 for use over a wireless LAN using Wi-Fi Protected Setup (WPS)
|
If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement Install the Software (Information)
|
|
|
Setting up the machine for use over a wireless LAN using WPS (Wifi Protected Setup) - MP640
|
If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement.
|
|
|
"No AirPrint Printers Found" When Attempting to Print from an iOS or iPadOS Device (PIXMA / MAXIFY)
|
Please follow these steps to troubleshoot the issue: - Wi-Fi ... is connected to Wi-Fi : Tap Wi-Fi ... Make sure that Wi-Fi is enabled. ... cycling does not help : ... the printer and wireless router closer together ... ... be interfering with Wi-Fi communication ... the printer and wireless router. ... network or no Wi-Fi is available: If your mobile device and printer ... network, or Wi-Fi is unavailable, ... This feature allows your printer to send it's own signal to your mobile device without the use of a wireless router.
|
|
|
Configure the Silex C-6700WG Print Server Through a Wireless LAN
|
Configure Through a Wireless LAN ... method, the wireless settings on the ... Verify the Wireless LED(Green ... Click Wireless CX Wireless Setup screen is ... ... to change the wireless settings on the ... If the wireless settings on the ... change the PC wireless settings to match ... Verify the wireless settings on the ... ... automatically changed the wireless settings on the ... ... this does not help , refer to ... Wireless Mode Select Infrastructure ... Wireless Mode Select AdHoc ... << If you did not change the wireless settings on the PC manually >> ... << If you changed the wireless settings on the PC manually >> ... Reset the wireless settings on the PC to match your network environment.
|
|
|
Wireless LAN setup using WPS Method (Macintosh)
|
Read this section only when setting up a wireless connection by using the WPS ( Wi-Fi Protected Setup). For details on WPS, refer to your access point's manual. Your access point or router must support WPS ( Wi-Fi Protected Setup) to use these setup instructions. ... The Wi-Fi lamp (blue) (C ... Make sure that the machine is turned on and that the Wi-Fi lamp (C ... If you do not know your administrator name or password, click the help
|
|
