| Search Results |
 |
PC faxing with the MX300
|
Sending a FAX Reference For details on valid characters, refer to the help for the fax driver. You can register the recipient you entered to the address Book by clicking Add to Address Book...
|
|
|
Sending faxes on an MX300
|
Use these instructions to send a fax from your printer.
|
|
|
Enter outside dialing prefix before the fax number
|
Enter outside dialing prefix before the fax number .
|
|
|
Verify the fax number to send to is correct
|
Contact the party to receive the fax and verify the fax number .
|
|
|
How to Test the Send and Receive Functions for Faxing
|
After you have connected the fax machine to your telephone line, you can now test to see if is ready to send and receive faxes . Here’s how:
|
|
|
Receiving a fax manually (MX300)
|
You can manually receive faxes while the fax is in any receive mode. Note: Dependent how the phone line is configured in the home, the fax machine may automatically switch to receive mode when it detects the sending machine's fax signals (CNG tones). When you receive a voice call:
|
|
|
Verify the remote fax machine is set to answer automatically
|
[BUSY/NO SIGNAL] will appear on the display (or #018 will appear on an Activity Report) for several reasons: The remote fax is not answering (disconnected, set to not answer automatically, memory is full, etc.). The fax number being dialed is incorrect. The fax number being dialed is busy.
|
|
|
Connect the fax to the correct phone line
|
This will occur if there are multiple lines and telephone jacks in the same location. Or if the telephone jack is wired for two lines. For example, line one is to be used for voice calls and line two is to receive faxes. Disconnect the fax machine from the telephone wall jack. Connect a known functioning single-line telephone directly to the telephone wall jack.
|
|
|
Facsimile (Fax) specifications MX300
|
The Public Switched Telephone Network currently supports fax modem speeds of 22.8 Kbps or lower, depending on telephone line conditions. Sending and receiving fax machines need to conform to ITU-Tv.34 guidelines.
|
|
|
Change the fax settings - MX300
|
DATE DISPLAY Sets the format of dates displayed on the LCD and printed on sent faxes . Three date formats are available; YYYY/MM/DD , MM/DD/YYYY
|
|
