| Search Results |
 |
Change the machine settings (MX700)
|
|
MX700 LCD Menu
|
... Menu while in FAX mode. ... Press the < FAX > button. At the FAX menu, press ... FAX Settings FAX : The machine ... and receive the fax automatically. ... : Specify the FAX pattern in the DRPD:Set FAX ring pat. ... to receive only faxes automatically with your ... telephone line for FAX use only. FAX : The telephone ... ... automatically receive the fax . FAX priority mode When ... telephone line for faxes and voice calls ... want to receive faxes automatically: FAX : The machine ... will receive the fax automatically.
|
|
|
Sending from an MX700 using a calling (credit) card
|
A calling (or credit) card can be used when sending faxes locally, long distance or overseas. Please see the back of the card for instructions on the exact dialing sequence. For instance, dial the toll free number provided by the vendor just as you would to make a regular phone call. If you are prompted to enter the calling card, do so - as you normally would. If a PIN (access code) has to be entered before the fax number is dialed, do so. If you use Coded speed dialing to send faxes, you can program the entire dialing string in each speed dial or program parts of the dialing sequence into specific speed dials. (You can program a maximum of 60 digits for each speed dial.) Programming parts of the dialing sequence is more reliable than trying to determine how many pauses to include in the dialing string. Review these suggestions to assist you in sending a successful fax using a calling or credit card.
|
|
|
LCD error messages (MX700)
|
... Click here for Fax user '# ... ... contents of the fax to be lost ... machine stores received faxes in memory without ... Print the fax stored in memory ... to print received faxes forcibly without storing ... contents of the fax may not be ... ... contents of the fax to be lost ... machine stores received faxes in memory without ... Print the fax stored in memory ... to print received faxes forcibly without storing ... contents of the fax may not be ... ... contents of the fax to be lost ... machine stores received faxes in memory without ... Print the fax stored in memory
|
|
|
PC faxing with the MX700
|
Sending a FAX Reference For details on valid characters, refer to the help for the fax driver. You can register the recipient you entered to the address Book by clicking Add to Address Book...
|
|
|
Fax Quick Tips - MX700
|
To assist you in finding an answer to your inquiry, some of our most referred-to articles have been categorized in this document. When you find an article that closely matches your inquiry, click on it to open it. Tips on setting up your fax machine The following articles will help you connect the fax to your phone line, program the date and time the fax name and phone number as well as selecting the right receive mode.
|
|
|
Remote receiving MX700
|
Remote Receiving If the machine is located away from the telephone, pick up the handset and dial 25 (the remote receiving ID ) to receive faxes (remote reception).
|
|
|
Choosing a receive mode MX700
|
If You Are Using a Single Telephone Line for Faxes and Voice Calls and Use Voice Calls More Frequently: Note If the machine is located away from the telephone, pick up the handset and dial 25 (the remote receiving ID ) to receive faxes (remote reception).
|
|
|
Using the Card Slot over a Network - MX700
|
Troubles in the Network Setup of the Card Slot Change the workgroup name to "WORKGROUP", then click OK If none of the above procedure helps , disconnect the network drive for the Card Slot and mount it again following the procedure below. (1)
|
|
|
MX700 firmware v.1.08 upgrade procedure on Mac OS X
|
If applicable, remove the LAN cable, USB cable from the direct print port (PictBridge) and a card from the card slot. ... * Before starting the firmware upgrade, print all received fax messages.
|
|
