| Search Results |
 |
Reseat ink cartridge(s) MX340 / MX350
|
Reseating a FINE Cartridge 4 . Install the FINE Cartridge. ... ( F )
|
|
|
Setting up additional computer(s) for use over wired / wireless LAN (Windows) - MX350 / MX870
|
After configuring the wired / wireless settings on the printer and the setup completed on one computer, it can be used on additional computers on the same network. Follow these instructions to install the software including the drivers on computers that you want to use with the machine. Other settings are not required. or My Computer When the CD-ROM contents appear, double-click MSETUP 4 .EXE For Windows 7
|
|
|
Installing / Removing ink cartridge(s) MX350
|
Make sure that each FINE Cartridge is installed in the correct position. Once a FINE Cartridge has been installed, do not remove it from the machine and leave it out in the open. This will cause the FINE Cartridge to dry out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use a FINE Cartridge within six months of first use.
|
|
|
Setting up additional computer(s) for use over wireless LAN (Macintosh) - MX350 / MX870
|
Install the Software (Registration) Select Canon MX350 (or MX870) series and click 'Add'. Go to step 4
|
|
|
Adjusting Brightness and Contrast
|
Adjusting Brightness and Contrast In ScanGear (scanner driver)' s Advanced Mode tab, click (Brightness/Contrast).
|
|
|
Adjusting Tone Curve
|
Adjusting Tone Curve In ScanGear (scanner driver)' s Advanced Mode tab, click (Tone Curve Settings).
|
|
|
Adjusting Saturation and Color Balance
|
Adjusting Saturation and Color Balance In ScanGear (scanner driver)' s Advanced Mode tab, click (Saturation/Color Balance).
|
|
|
Multi-function printers from 2012 - 2015 that support My Image Garden
|
Printer models Scanning 2015 models MG3600 series Y Y Y Y MG5700 series Y Y Y Y MG6800 series Y Y Y Y MG7700 series Y Y Y Y PRO-10 S Y Y Y - PRO-100 S Y Y Y - MX490 series Y - Y Y 2014 models
|
|
|
If setup does not automatically locate installation files, browse to the Windows folder to locate driver software for your device
|
If setup does not automatically locate installation files and the below message appears, open Device Manager and update the device driver( s ) by browsing to C:\Windows folder.
|
|
|
Disconnect other device and reboot computer
|
Other devices attached to the computer can block proper communication. Check to see if there are any devices (other than USB keyboards or mice) connected to the computer. Disconnect the device( s ) and restart the computer. Once the computer has restarted, attempt your process again.
|
|
