| Search Results |
 |
Error / Warning Messages - LX-D5500 / LX-P5510
|
Operator Call Error If the application software or printer driver's configuration is different, click on the Status Monitor's [Cancel Print Job] and print again after correctly configuring the paper size. Paper load error . The paper is not fed.
|
|
|
Paper is Jammed - LX-P1300 / LX-D1300
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as “ Paper jam #****” (**** represents numbers). Remove the paper jam according to the following steps:
|
|
|
Paper Is Jammed - LX-D5500 / LX-P5510
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as " Paper jam #". Follow the steps below to remove the paper jam.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
By default, the Status Monitor will start automatically every time a print job begins. You can also start the Status Monitor as soon as Windows starts up by selecting the specific function in the menu. You can store the Status Monitor normally in the taskbar or the task tray and display it only if an error occurs.
|
|
|
Printing on Label Tape, Heat Shrink Tube, and 4mm I.D. Strips - Mk1500
|
Install the cassettes Confirm that the release paper is not peeled when setting the label cassette . Before setting, cut the part where the release paper is peeled or the end is not straight.
|
|
|
Printing on Label Tape, Heat Shrink Tube, and 4mm I.D. Strips - Mk2600
|
Install the cassettes Confirm that the release paper is not peeled when setting the label cassette . Before setting, cut the part where the release paper is peeled or the end is not straight.
|
|
|
Loading Paper LX-D1300 / LX-P1300
|
Loading Paper When replacing the paper before finishing printing, set new paper which is of the same type and size as that of the paper to be replaced. Using new paper of a different type or size could cause a printing error
|
|
|
Printing on Tubes and Clear Tubes (Installing Cassettes / Inserting the Tube) - Mk2600
|
Inserting the Tube Insert the tube with the warp oriented as shown in the figure. If the tube is inserted in a wrong orientation, it can jam and cause a feed error .
|
|
|
Use the Printer Driver - LX-D5500 / LX-P5510
|
|
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
... use the actual paper you will use ... ... size of the paper being set to ... ... or if an error has occurred. Check that paper is set in ... ... , [Step 1 ] Print adjustment ... LX- D 5500 ... centered on the paper . ... end of the paper and 1. ... Detailed printhead position adjustment pattern LX- D 5500 Check ( 1 ), ( ...
|
|
