| Search Results |
 |
Error / Warning Messages - LX-D5500 / LX-P5510
|
Operator Call Error If the same error occurs again, update the printer drivers and firmware to the latest versions. Gap / Mark length difference X The gap / mark length of the set paper differs from the gap / mark length of the paper size set by the application software or printer driver.
|
|
|
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
The print head position cannot be adjusted while printing is in progress or if an error has occurred. ... Detailed printhead position adjustment pattern If the radio button is selected, the visible point in the adjustment pattern in Detailed Print Head Position Adjustment dialog box is marked in a red border. ... The setting information cannot be printed if an error has occurred or while the printer is printing.
|
|
|
Use the Printer Driver - LX-D5500 / LX-P5510
|
Standard label paper (W x L) mm Margins mm Gap / Mark mm Gap mm Top Bottom Left Right Left Right 4 X 1.5 Label / Gap Label / Gap 97.3 × 38.1 1.5 1.5 1.5 1.5 2.5 2.0 2.3 4 X 3 Label / Gap Label / Gap 97.3 × 76.2
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
... only if an error occurs. Start Options ... ( ● ) marks the currently selected ... View Options ... ( ● ) marks the currently selected ... ... message when an error occurs. Viewing the Printer Status ... Displayed when an error has been issued ... An error message is displayed with ... completed when an error is issued. ... open when an error occurs if it ... Operator Call Error These errors are issued for ... Service Call Error This error message will be issued ... ... , if the error occurs again make ... the 4 digit error code , and contact ... If multiple errors occur at once, the errors will be prioritized based on importance.
|
|
|
Troubleshoot the LX-D5500 / LX-P5510
|
Did an error occur? ... With some Status Monitor settings, printer errors will not be displayed and the Status Monitor will not start. ... Open the [Color] tab of the printer driver, and set the [Half-tone] to [ Error Diffusion]. ... Open the [Color] tab of the printer driver, and set the [Half-tone] to [ Error Diffusion]. ... Printed paper is wavy and rubbing marks are left on the paper.
|
|
|
Paper is Jammed - LX-P1300 / LX-D1300
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as “Paper jam #****” (**** represents numbers). Remove the paper jam according to the following steps:
|
|
|
Paper Is Jammed - LX-D5500 / LX-P5510
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as "Paper jam #". Follow the steps below to remove the paper jam.
|
|
|
Replacing the Ink Tank(s) - LX-P1300 / LX-D1300
|
Replacing the Ink Tank (Indication by Ink lamp) An error message “XXXX ink empty” appears on the status monitor. (Indication on the status monitor)
|
|
|
Edit Characters and Lines - MK3000
|
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. Refer to the following to set the character size and frame.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
|
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
