| Search Results |
 |
Error / Warning Messages - LX-D5500 / LX-P5510
|
Operator Call Error If the printer is shared, start Windows Task Manager, and confirm that "Canon XXXX Status Monitor Service" (where XXXX is the model name) is registered in the [Service] tab. If it is not registered, refer to "Installing the Printer Driver" in Getting Started Guide to register the server client. Confirm the port settings.
|
|
|
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
The print head position cannot be adjusted while printing is in progress or if an error has occurred. ... Detailed printhead position adjustment pattern The setting information cannot be printed if an error has occurred or while the printer is printing. ... If this function is run on a shared printer, make sure the status monitor has not been launched on the client when working on a server , or has not been launched on the server when working on the client.
|
|
|
Move or Ship the Printer - LX-D5500 / LX-P5510
|
... progress or any error has occurred, ... ... working on a server , or has ... launched on the server when working on ... When printing is in progress or any error has occurred, [Shipping The Printer] cannot be executed. ... If this function is run on a shared printer, make sure the Status Monitor has not been launched on the client when working on a server , or has not been launched on the server when working on the client.
|
|
|
Paper is Jammed - LX-P1300 / LX-D1300
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as “Paper jam #****” (**** represents numbers). Remove the paper jam according to the following steps:
|
|
|
Paper Is Jammed - LX-D5500 / LX-P5510
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as "Paper jam #". Follow the steps below to remove the paper jam.
|
|
|
Replacing the Ink Tank(s) - LX-P1300 / LX-D1300
|
Replacing the Ink Tank (Indication by Ink lamp) An error message “XXXX ink empty” appears on the status monitor. (Indication on the status monitor)
|
|
|
Edit Characters and Lines - MK3000
|
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. Refer to the following to set the character size and frame.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
|
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
|
Replacing an Ink Tank - LX-D5500 / LX-P5510
|
Do not shake the ink tank. If you do, the error message "xxx ink empty" may appear immediately after replacing the ink tank. If this happens, remove the ink tank and insert it again.
|
|
|
Maintain Ink Quality - LX-P5510
|
The display shown below pops up as soon as the error message [Exceeding ink refresh timing] appears. Click [Start Ink Refresh]. Click [Help] to check the ink refresh procedure.
|
|
