| Search Results |
 |
Loading Paper LX-D1300 / LX-P1300
|
Loading Paper When replacing the paper before finishing printing, set new paper which is of the same type and size as that of the paper to be replaced. Using new paper of a different type or size could cause a printing error
|
|
|
Error / Warning Messages - LX-D5500 / LX-P5510
|
Operator Call Error Overlay data error. Error with overlay printing data. Confirm the cable connection and retry printing.
|
|
|
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
Detailed printhead position adjustment pattern Select the printer or a file (*.txt) as the output destination. The setting information cannot be printed if an error has occurred or while the printer is printing . Close the status monitor if it is running.
|
|
|
Replacing the Ink Tank(s) - LX-P1300 / LX-D1300
|
Replacing the Ink Tank (Indication by Ink lamp) An error message “XXXX ink empty” appears on the status monitor. (Indication on the status monitor)
|
|
|
Replacing an Ink Tank - LX-D5500 / LX-P5510
|
Do not shake the ink tank. If you do, the error message "xxx ink empty" may appear immediately after replacing the ink tank. If this happens, remove the ink tank and insert it again.
|
|
|
Maintain Ink Quality - LX-P5510
|
The display shown below pops up as soon as the error message [Exceeding ink refresh timing] appears. Click [Start Ink Refresh]. Click [Help] to check the ink refresh procedure.
|
|
|
Move or Ship the Printer - LX-D5500 / LX-P5510
|
When printing is in progress or any error has occurred, [Moving The Printer] cannot be executed. Close the Status Monitor if it is running.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
Viewing the Printer Status An error message is displayed with the printer status, printing cannot be completed when an error is issued. Troubleshoot the problem as required.
|
|
|
Use the Printer Driver - LX-D5500 / LX-P5510
|
Placing the Printer in Sleep Mode When printing is in progress or an error has occurred, the printer cannot be switched to sleep mode. The printer enters sleep mode automatically when it has been left idle for a certain period of time under normal operating conditions. By default, the sleep timer is set to 4 minutes.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
|
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
