| Search Results |
 |
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
... will display the help screen showing the ... How to Read the Printed Setting Values ... you require additional help , please create ... Or if you still need help , visit our Canon Community by clicking the button below to get answers: ______________________________________ ...
|
|
|
Error / Warning Messages - LX-D5500 / LX-P5510
|
Operator Call Error If the same error occurs again, update the printer drivers and firmware to the latest versions. Gap / Mark length difference X The gap / mark length of the set paper differs from the gap / mark length of the paper size set by the application software or printer driver.
|
|
|
Use the Printer Driver - LX-D5500 / LX-P5510
|
Standard label paper (W x L) mm Margins mm Gap / Mark mm Gap mm Top Bottom Left Right Left Right 4 X 1.5 Label / Gap Label / Gap 97.3 × 38.1 1.5 1.5 1.5 1.5 2.5 2.0 2.3 4 X 3 Label / Gap Label / Gap 97.3 × 76.2
|
|
|
Troubleshoot the LX-D5500 / LX-P5510
|
... wavy and rubbing marks are left on ... ... you require additional help , please create ... Or if you still need help , visit our Canon Community by clicking the button below to get answers: __________________________________________________________________ ...
|
|
|
"Request of the print head check" Appears on the Screen - LX-D5500 / LX-P5510
|
If a "Check the print head" warning or "Replace print head" a Service Call Error appears, "Request of the print head check" will also appear as a pop-up on the screen. Because cleaning is more frequent than usual, print head check is necessary. If this message appears, click [ Help ].
|
|
|
Check the Maintenance Cartridge Information - LX-D5500 / LX-P5510
|
Checking the Ink Information If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Clean the Print Head - LX-D5500 / LX-P5510
|
If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
Start Options Click either Start During Printing or Start With Windows. A dot symbol ( ● ) marks the currently selected item.
|
|
|
Paper is Jammed - LX-P1300 / LX-D1300
|
Paper Is Jammed Cut the paper's separator (mount) part. The paper has the mark , cut the center of the The paper has the mark , cut the center of the mark . 3. Remove the jammed paper from the roll holder side.
|
|
|
Load Roll Paper - LX-D5500 / LX-P5510
|
Load Roll Paper If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
