| Search Results |
 |
Error / Warning Messages - LX-D5500 / LX-P5510
|
When trouble occurs while operating the printer or printing, the Status Monitor will activate and display error messages and warning messages. If problems persist after trying these procedures, please contact your place of purchase.
|
|
|
Paper Is Jammed - LX-D5500 / LX-P5510
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as "Paper jam #". Follow the steps below to remove the paper jam.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
|
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
|
Replacing an Ink Tank - LX-D5500 / LX-P5510
|
Do not shake the ink tank. If you do, the error message "xxx ink empty" may appear immediately after replacing the ink tank. If this happens, remove the ink tank and insert it again.
|
|
|
Maintain Ink Quality - LX-P5510
|
The display shown below pops up as soon as the error message [Exceeding ink refresh timing] appears. Click [Start Ink Refresh]. Click [Help] to check the ink refresh procedure.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
Viewing the Printer Status An error message is displayed with the printer status, printing cannot be completed when an error is issued. Troubleshoot the problem as required.
|
|
|
"Request of the print head check" Appears on the Screen - LX-D5500 / LX-P5510
|
If a "Check the print head" warning or "Replace print head" a Service Call Error appears, "Request of the print head check" will also appear as a pop-up on the screen. Because cleaning is more frequent than usual, print head check is necessary. If this message appears, click [Help].
|
|
|
Troubleshoot the LX-D5500 / LX-P5510
|
Solution Did an error occur? Double-click the message of the [Status Information] displayed on the Status Monitor and operate according to the directions given
|
|
|
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
Adjustment patterns change depending on the size of the paper being set to printer, although the adjustment method is the same. The print head position cannot be adjusted while printing is in progress or if an error has occurred. Administrative privileges over this printer are required to configure the printer settings.
|
|
|
Move or Ship the Printer - LX-D5500 / LX-P5510
|
When printing is in progress or any error has occurred, [Moving The Printer] cannot be executed. Close the Status Monitor if it is running.
|
|
