| Search Results |
 |
Print the Network Settings (LAN Details) - PRO-300
|
Printing the Network Settings 3- 2-8 ... Not activated/Processing/Server error /Connection error /Timeout error / Error /Awaiting server response/Active
|
|
|
imagePROGRAF TX Printer Series EC16-2022 Upper Roll Drive Overload Error
|
Some users have encounter the following error when printing on 500ft rolls of 20lbs bond paper (75gsm) : “Hardware Error E 16-2O22: Upper Roll Drive Overload”
|
|
|
Download and run the "Delete Tool for Firmware Update Tool".
|
During the upgrading of the firmware, please do not turn off the power of the printer. Once firmware files are received, the printer automatically overwrites the firmware and reboots. If the power is turned off during this period, ex. by unplugging the power plug from the outlet, the writing of the firmware would fail, and a checksum error ( E 196-4040) will occur.
|
|
|
How to configure an imagePROGRAF iPF670E connected to a Mac
|
If an error message is displayed, check the settings and correct any invalid values. Note You can also specify the subnet mask and default gateway on the Control Panel.
|
|
|
Media Specifications (iPF6300/6350)
|
Top Load Manual Feed - 0.07 mm - 0.8 mm ( 2.8 mil - 31.4 mil) Roll Feed - 0.07mm - 0.8 mm (2.8mil - 31.4 mil)
|
|
|
Registering User Information to the Canon Inkjet Cloud Printing Center (No LCD) - PRO-1000
|
Registering from Your Smartphone, Tablet, or Computer (Uppercase and lowercase letters are differentiated.) Multibyte characters cannot be used. You will get an error if the e -mail address you enter contains a character that cannot be used.
|
|
|
Adding the Second and Following Printer(s)
|
If your model has no LCD monitor/If you are using TR4500 series or PRO-1000 series (Uppercase and lowercase letters are differentiated.) Multibyte characters cannot be used. You will get an error if the e -mail address you enter contains a character that cannot be used.
|
|
|
PRO-1000 List of Support Codes
|
Support Code Appears on LCD and Computer Screen 140 E 140 F ... 6 F 00
|
|
|
Colortrac T36 Scanner Operation Errors
|
Scan speed can be adjusted as follows: 100% = full speed, 50 % = ½ speed, 33% = 1/3 speed, 25 = ¼ speed. Use slower speeds to scan delicate documents or to prevent Stop/Start scanning.
|
|
|
Colortrac L24e and L36e Scanner Memory Errors
|
If you receive an Error 3, 4, 5, 6, 7, or 8, related to memory errors . Check the label shown below on the back of the scanner to see if there is a red dot as shown on the example.
|
|
