| Search Results |
 |
Replace the ink tank(s) - iP4700
|
Replace the Ink Tank( s ) To maintain optimal printing quality, use an ink tank within six months of first use. ... 4 . Prepare the new ink tank. ... Do not touch the electrical contacts ( F ) on the ink tank.
|
|
|
Replace the Ink Tank(s)- BJC-85
|
Installing / Replacing Ink Tanks Skip to step 4 if installing ink for the first time 1. Make sure that the printer is turned on and open the cartridge cover. 2. Press the <CARTRIDGE> button to move the cartridge holder to the center.
|
|
|
Confirm the ink tank(s) are properly installed iP4820
|
Ensure that the ink tank is installed properly. 4 . Tilt the ink tank, then insert it under the label and against the back end of the slot. ... Make sure the Inner Cover ( F ) is closed.
|
|
|
Replace the ink tank(s) - iX7000
|
Replacing Color or Black Ink Tanks When color or black ink runs out while printing is in progress, the Alarm lamp will flash orange four times and the error message will appear on your computer screen. ... To maintain optimal printing quality, use an ink tank within six months of first use. ... 4 . Prepare the new ink tank.
|
|
|
Replace the ink tank(s) - iP4300
|
Replacing Ink Tanks 4 . Prepare a replacement tank. ... Be sure to remove the clear film from the ink tank in the exact order shown in step 4 , as failure to follow this step may cause the ink to leak and stain your clothes and hands. ... To maintain optimal print quality, use an ink tank within six months of first use.
|
|
|
Replace the ink tank(s) - iP4500
|
When ink runs out or an error occurs, follow the instructions below to change the affected ink tank( s ): 4 . Prepare a replacement tank. ... Be sure to remove the clear film from the ink tank in the exact order shown in step 4 , as failure to follow this step may cause the ink to leak and stain your clothes and hands. ... To maintain optimal print quality, use an ink tank within six months of first use.
|
|
|
Press the RESUME button to continue. Replace Ink Tank(s) as soon as possible - BJC-85
|
Untitled Document If the low-ink alert has been turned on, the orange ERROR light will flash and tell you which ink tank is low by the number of flashes. You can continue the print job until the ink runs out by pressing the <RESUME> button, but immediate replacement of the ink tank is recommended. Use the printer driver or the printer' s operation panel to reset the low-ink alert after replacing the ink tank.
|
|
