| Search Results |
 |
Portable Kit User’s Guide Kit portable Guide d’Utilisation
|
For the battery charging progress, see “Charging the Battery.” For the battery condition and errors , see “Troubleshooting.”
|
|
 |
Attach the Battery to the Printer Correctly - iP100 / iP110
|
Attach the Battery to the Printer Correctly When using the printer in locations where there is no power outlet (outdoors, etc.), attach the optional battery (i. e . battery pack installed in the battery attachment) to the printer. Before using the battery pack and battery attachment, read "Safety Precautions" thoroughly.
|
|
|
Printer Shows a B200 or Related Error (Models with Individual Ink Tanks)
|
Error code B200 (or related errors B201 / B202 / B203 / B204 / B205 / B206 / B207) generally means that print head communication has failed and that your printer will require service or replacement.
|
|
|
Check the Ink Status Information on a PIXMA iP100
|
Check ink status from the printer An error message may be displayed during printing. Confirm the displayed message and take the appropriate action.
|
|
|
Charge the battery - iP100
|
|
Use the Printer's Status Monitor to Track Print Jobs - Windows
|
If you display the Status Monitor, you can track the progress of print jobs, see errors when they occur, find out if ink is running low, and learn how to fix problems.
|
|
|
Replace the ink tank(s) - iP100
|
When ink runs out or an error occurs, follow the instructions below to change the affected ink tank(s):
|
|
|
Connect the camera to the printer properly iP100
|
If an error has occurred, disconnect the camera cable, press the printer's RESUME/CANCEL button and reconnect the cable following the steps below:
|
|
|
Alarm Lamp Flashes Orange - PIXMA iP100
|
When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error.
|
|
|
Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately - iP100
|
Follow the procedure below to resolve the problem. Disconnect the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply. If the battery is attached, remove it once. Plug the printer back in and turn the printer back on after leaving it for five minutes or more.
|
|
