| Search Results |
 |
Print and Understand a Wireless Network Settings Page
|
Read a Wireless Network Settings page Signal Strength: Here you will see the strength of the printer's network connection. A signal strength lower than 80% may result in slower performance or errors when printing or scanning. If it is too low, consider moving your printer closer to your wireless router.
|
|
|
Support Code 1688 The Ink Has Run Out - PIXMA TR150
|
Good to know Printing with the support code 1688 warning may damage the printer.
|
|
|
PIXMA / MAXIFY Printer Models with Native Chrome OS Printing Support
|
Please note that some all-in-one models that have native Chrome OS printing support do not The following MAXIFY, PIXMA, and imagePROGRAF / PIXMA PRO models have native Chrome OS printing support. MAXIFY
|
|
|
Load Paper - PIXMA TR150
|
Load plain paper or photo paper. matches the paper settings. When this function is enabled, an error message is displayed to prevent incorrect prints . Review and correct the paper settings and print again.
|
|
|
Basic Prints From a Mac Computer - PIXMA TR150
|
Print from a Mac An error may occur if the paper size set in the print dialog is different from the paper size set on the printer. Make sure the settings match before you print
|
|
|
Adjust Feed Settings on the Operation Panel - PIXMA TR150
|
Feed settings detects whether the paper size and the media type are identical with those registered in Feed settings If a print job starts with settings that do not match, an error message is displayed on the LCD When Disable
|
|
|
Resolve Error Messages From a Wireless PictBridge Device - PIXMA TR150
|
Learn how to resolve an error message on your wireless PictBridge (Wi-Fi) device when you print on the PIXMA TR150.
|
|
|
Load Envelopes - PIXMA TR150
|
Prepare the printer and insert the envelopes A function is built into the printer that detects if the paper settings for the rear tray matches the print settings. An error message will pop up if the settings are incorrect and will stop the print job. Make sure the settings always match before you begin.
|
|
|
Support Code 21F0 - PIXMA TR150
|
Review the information below if you can't print with the current print settings because Force ink tank selection is set to Black only
|
|
|
Support Code 5100 - PIXMA TR150
|
Resolve support code 5100 's Stop button to cancel the print job. Turn off the printer
|
|
