| Search Results |
 |
Cleaning and Replacing the Air Filter
|
The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raise the temperature of the projector. The following screen is displayed when turning on the projector if the air filter needs to be cleaned (after approx.
|
|
|
Maintenance Cleaning the Projector
|
The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raise the internal temperature of the projector
|
|
|
Cleaning and Replacing the Air Filter
|
An air filter is installed in the air intake vent on the bottom of the main body to protect the lens and mirror from dust. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raises the temperature of the projector. The following screen is displayed when turning on the projector if the air filter needs to be cleaned.
|
|
|
Here are the Maintenance and Cleaning and Lamp Replacement Procedures for the SX-80 Projector
|
An air filter is installed in the air intake vent on the bottom of the main body to protect the lens and mirror from dust. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raises the temperature of the projector.
|
|
|
Replacing the Lamp
|
Fully insert a new lamp unit and secure it with the 3 screws. ... • It is recommended that you also replace the air filter when you replace the lamp. ... • Replacement air filter product number: RS-FL01
|
|
|
How to Initialize network settings on the SX80 Mk II / SX800
|
[ Filter Time]: The total filter used time ... field for the error report, and ... [To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon copy of the error report is sent (Within 63 alphanumeric characters, can be omitted) ... [ Error report]: Turning ON/OFF the error report sending function (the factory default: [OFF])
|
|
|
Controlling the projector remotely through a web browser (e-Control®) LX-MH502Z
|
The tools page allows you to manage the projector, configure the Network Settings and secure access of remote network operation on this projector. ... iv. Once set, access to the remote network operation on this projector has been password- protected . v. Once set, access to the tools page has been password- protected ... When the projector is in normal conditions or in any abnormal conditions other than the ones mentioned below, the Error Status column will be "0:No Error ".
|
|
|
How to Clean and Replace the Air Filter on the WUX10 Mk II / WUX10 MKIID
|
|
PIN Code Protection
|
|
Replacing the Filter
|
