| Search Results |
 |
Side Controls
|
Side Control ... Lights up or flashes when an error occurs. ... Lights up together with the [WARNING] indicator (constantly lit) when a temperature error has occurred. ... (4) LENS button - Each time the button is pressed, the screen changes to focus adjustment, zoom ( image size) adjustment, or lens shift ( image position) adjustment.
|
|
|
How to Set an IP Address when using the SX80 Mk II
|
It is possible to send an error notification e-mail (P119) from the projector to the computer when you connect the projector to the network. ... (The examples shown are Windows XP screenshot images .) ... 3 Open [ Control Panel] from the [Start] menu, then select [Network and Internet Connections] - [Network Connections]. ... Error Notification Message If errors occur in the projector, the following messages are sent.
|
|
|
Determining the Installation Position
|
A slight error in the projection angle can be corrected using the [KEYSTONE] button ... If you mount the projector on the ceiling, you have to invert the projected image
|
|
|
Projecting Two Images Side by Side WUX7000Z / WUX6600Z / WUX5800Z
|
Press the INPUT button, and then select the input signal for the side with control rights. To determine which side is currently under your control , check the image ID in orange in the upper right of the menu. The side without control rights is labeled with a white circle.
|
|
|
Menu Image Adjustment WUX7500 / WUX6700 / WUX5800
|
Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. Menu screen when the input signal is HDMI Menus that are not available are grayed out or hidden. * Any adjustments you make are stored for each combination of input signal and image mode. Image mode Select the overall image quality for projected images . Can also be selected by pressing the IMAGE button on the remote control Menus that are not available are grayed out or hidden. You can adjust the image quality by adjusting the following items in each image mode: [Brightness], [Contrast], [Sharpness], [Gamma], [Color adjustment], [Advanced adjustment], and [Lamp mode] Create profile Save desired image quality settings in up to five user profiles.
|
|
|
Menu Description Image mode REALis 4K6020Z / 4K5020Z
|
Select the overall image quality for projected images. Can also be selected by pressing the IMAGE button on the remote control
|
|
|
Computer Input - Image Mode Selection
|
and User 4 by pressing the IMAGE button on the remote control unit. Menu Operation
|
|
|
Projecting an Image in the DICOM SIM Mode REALis 4K6020Z / 4K5020Z
|
• It may take approximately 30 minutes until the projection brightness of this projector becomes stabled. Switching the mode to the DICOM SIM Mode 1 Press the IMAGE button on the remote control until [DICOM SIM] is displayed or select [DICOM SIM] from [ Image mode] in the [ Image adjustment] menu.
|
|
|
Selecting an Image Mode
|
Press the IMAGE button on the remote control to select your desired image mode. The selection is toggled among aspect types by pressing the button.
|
|
|
Here are the Menu Descriptions & Functions [Image adjustment] for the LV-7490
|
Sharpness ........................ Controls the detail of the image for Video. Color level
|
|
