| Search Results |
 |
Side Controls
|
Lights up or flashes when an error occurs. ... Lights up together with the [WARNING] indicator (constantly lit) when a temperature error has occurred. ... ( 2 ) POWER button - Turns the projector on or off.
|
|
|
Network Setting REALis 4K6020Z / 4K5020Z
|
2 Enter setting details in the fields shown (1), and then click [OK] ( 2 ). ... Setting Errors When a setting-related error occurs, the error name is displayed on the screen, and a “ ” mark is displayed next to the input field which caused the error . ... 2 Click [Initialize network settings].
|
|
|
How to Set an IP Address when using the SX80 Mk II
|
... to send an error notification e- ... 2 Turn on the power of the projector and computer. ... 2 Follow the steps 3 to 6 to restore the computer's IP address and subnet mask that you have written down to the original values. ... 2 In the password setting screen, enter "root" for [User name] and "system" for [Password], and click the [OK] button. ... 2 Click [Initialize] in the network setting page. ... Error Notification Message If errors occur in the projector, the following messages are sent.
|
|
|
How to Initialize network settings on the SX80 Mk II / SX800
|
2 Click [TCP ... ... field for the error report, and ... [To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon copy of the error report is sent (Within 63 alphanumeric characters, can be omitted) ... [ Error report]: Turning ON/OFF the error report sending function (the factory default: [OFF])
|
|
|
Setting an IP Address
|
It is possible to send an error notification e-mail from the projector to the computer when you connect the projector to the network. ... 2 ... 2
|
|
|
How to install the software for the DZ-3600U
|
Make sure that the DZ-3600U's power is off before you install the software. Attempting to install it with the power on will result in an [Unknown device] error message after installation. If you have already started to install the software with the power on, stop the installation, shut down Windows and turn off your computer.
|
|
|
Error Notification Mails WUX7500 / WUX6700 / WUX5800
|
|
Error Notification Mails REALis 4K6020Z / 4K5020Z
|
|
What the exposure error warnings mean on the SX80 Mk II / SX800
|
What the exposure error warnings mean.
|
|
|
Projecting Two Images Side by Side WUX7000Z / WUX6600Z / WUX5800Z
|
