| Search Results |
 |
Application (My App) Rayo S1
|
❸ From the list of selected cities, click [ X ] next to the city to delete. ... For more about how to use it, see Help in the application or visit the website (https://www.wps.com/android).
|
|
|
Menu Image Adjustment WUX7500 / WUX6700 / WUX5800
|
Brightness Adjust image brightness. Contrast Sharpen or soften image contrast. Sharpness Adjust image sharpness. Gamma Correct image areas that are too dark or too bright to see clearly. Color adjustment Adjust color-related settings such as color level, color balance, and color temperature. In [DICOM SIM] image mode, [Color temperature] is not adjusted with numeric values but set to one of the following five presets. Preset 1: Prioritize brightness, relative to DICOM Standard Part 14 . Preset 2: Prioritize color tone, relative to DICOM Standard Part 14 . Preset 3: Adjust color to conform to DICOM Standard Part 14 . Preset 4: Reproduce colors of X -ray film (Clear base). Preset 5: Reproduce colors of X -ray film (Blue base). Advanced adjustment Fine-tune noise reduction and color tone. Ambient light Minimize the effect of ambient light on the screen. [Ambient light] is available when the image mode is [Photo/sRGB] Random noise reduction Reduce random image noise*. * Effective on noise with an irregular frequency or amplitude.
|
|
|
How to Set RS-232C Settings on the WUX10
|
While the WUX10 does have an RS-232 connection and codes as you mentioned, CITS does not assist in the use of them.
|
|
|
DICOM SIM MODE explained (Wux10 Mk II D)
|
In the DICOM simulation mode (hereinafter referred to as "DICOM SIM"), this projector can project a monochrome medical image such as an X ray radiography, CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and Communications in Medicine) standard. Typically, to project the image according to the DICOM standard, it requires the grayscale tone correction using a luminance meter according to the environment. In this projector, there are 21 types of tone settings for various ambient lights.
|
|
|
Here are some common troubleshooting tips for the LV-X2
|
Before calling your dealer or service center for assistance , check the following: 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING THE PROJECTOR"
|
|
|
How to access the Control Panel in Windows 8
|
On your keyboard, hold the windows key and press " X ". Click Control Panel
|
|
|
How to access the Windows Firewall settings
|
In Windows 8 or 8.1 On your keyboard, hold the windows key and press " X ". In Windows 7 or 10, access Control Panel from the Start menu.
|
|
|
Projecting an Image in the DICOM SIM Mode REALis 4K6020Z / 4K5020Z
|
In the DICOM simulation mode (hereinafter referred to as “DICOM SIM”), this projector can project a monochrome medical image such as an X ray radiography, CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and Communications in Medicine) standard. Typically, to project the image according to the DICOM standard, it requires the grayscale tone correction using a luminance meter according to the environment. In this projector, there are 21 types of tone settings for various ambient lights.
|
|
|
Menu System settings WUX7500 / WUX6700 / WUX5800
|
Menu screen when the input signal is HDMI Menus that are not available are grayed out or hidden. User screen settings Capture a logo and specify logo display settings. Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Only images at an aspect ratio of 16:10 can be registered as user logos. Logo position Specify the position of registered user logos. You can specify the position after a logo has been registered. Choose from upper left, upper right, center, lower left, or lower right. No signal screen Customize the screen shown when no input signals are received. Screen when blank Select the screen shown when projection is temporarily blanked out by pressing the BLANK button on the remote control. Projector on Select a logo to project after startup until input signals can be projected. On screen Specify display details for on-screen menus, help , and warning or precaution icons. Menu position Reposition menu display. Choose from upper left, upper right, center, lower left, or lower right. Only [Center] is available when edge blending is used. Other display positions are grayed out and not available. Menu display time Extend menu display from the standard 10 or 30 seconds to 3 minutes. The following display times are also changed. Guide Shows the guide screen.
|
|
|
Available optional accessories for the SX7 / SX6 / SX60 / X700.
|
Specifications Magnifications: 0.7 X Lens Construction: 4 elements in 4 groups
|
|
|
