Canon Knowledge Base

Filters

Search Results

You can set up a Wi-Fi connection to a Cannon digital camera to project images and videos from the camera on to the projector. ... You can only use this feature for Cannon digital cameras that supports Wi-Fi connections (some do not support Wi-Fi connection). ... For more about how to use it, see Help in the application or visit the website (https://www.wps.com/android).

Here are some common troubleshooting tips for the LV-X2

Before calling your dealer or service center for assistance , check the following: 1 . Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING THE PROJECTOR"

Basic Wireless Network Settings [Wireless] WUX7000Z / WUX6600Z / WUX5800Z

Basic Wireless Network Settings [ Wireless ] ... From [ Wireless ] on the settings screen, you can complete basic network information for wireless connections. ... • IPv6 connectivity is not available in PJ AP mode ( P 84). ... Enter 1 -byte alphanumeric characters, including hyphens and underscores ( 1 – 15 characters).

Basic Wireless Network Settings [Wireless] REALis 4K6020Z / 4K5020Z

Basic Wireless Network Settings [ Wireless ] ... From [ Wireless ] on the settings screen, you can complete basic network information for wireless connections. ... • IPv6 connectivity is not available in PJ AP mode ( P 66). ... • For partial SSID editing when connected in PJ AP wireless LAN mode ( P 66), you can edit the portion between PJ- and _Canon0D. Enter 1 -byte alphanumeric characters, including hyphens and underscores ( 1 – 15 characters).

2018 CANON PROJECTOR LINE-UP

• MultipleImageModes* 9includingDICOM®SimulationMode* 1 ◊ 1 This model is also available without Wi-Fi ® as the 4K601STZ. • Native 4K Resolution (4096 x 2400) • Up to 6000 Lumens and up to 10,000:1 Dynamic Contrast Ratio* 5 • Laser Light Source with 20,000 Hours* 7 • Compact and Lightweight Design • LCOS Technology with AISYS-enhancement • Genuine Canon Standard Zoom Lens with Consistent Brightness throughout 1.76x Zoom Range

Mirroring connection (Windows OS) Rayo S1

If there is a problem with the connection, proceed as follows: 1 . On the display screen, click Add a Wireless Display. 2. Select this device name on the projector and select Delete Device.

Using the Browser Rayo S1

Turn off the Wi-Fi function when not in use (to prevent battery drain) 1 . Click the "Setting" icon on the Home screen, select Wi-Fi from the Setting screen, and press the switch to enable the feature. 2. Select the Wi-Fi you want to connect to from the list of available Wi-Fi network list.

Connecting to a Network REALis 4K6020Z / 4K5020Z

• Remember to set your preferred network (wired or wireless ) to [On] if [Network (wired/ wireless )] on the projector is set to [Off/Off] and the network connection is disabled ( P 160). For wireless networks, choose the type of connection.

Menu Remote control/Side control WUX7500 / WUX6700 / WUX5800

Remote control/Side control Specify which operations are available using buttons on the remote control or in the projector’s side controls. Beep You can select whether a beep sounds or not when you operate the projector. The beep will not sound if you mute the projector sound with the MUTE button on the remote control. Key repeat Key repeat enables projector or remote control buttons to be held down instead of pressing them repeatedly. Key lock Lock the projector or remote ( wireless ) to prevent operation. To Unlock Key Lock Function Turn off the projector and unplug the power plug. Hold down the OK button on the projector and plug in the power cord, as you continue to hold down the OK button. In a moment, a beep will sound, and the controls will be unlocked. When you access this setting from the projector’s side controls, [Main unit] is not available. Similarly, when you access the setting from the remote control, [Remote ( wireless )] is not available. IR receiver settings Select the infrared receiver of the projector. Remote control channel Separate channels can be assigned to up to four projectors so that a single remote control can be used with each projector. Selecting the Projector Channel If a wired remote control is used, there is no need to set the remote control channel Selecting a Channel on the Remote Control After changing the projector channel from the menu, always change the remote control channel accordingly.

Using PC-Free Multi Projection WUX7500 / WUX6700 / WUX5800

Using PC-Free Multi Projection A JPEG image on a USB flash drive can be divided among up to nine projectors and combined into a single , large image. When projectors are connected via a wired LAN, the projector that produces the image in the upper left is called the Primary projector and the other eight, Secondary projectors. The image as a whole is controlled by the Primary projector PC-free multi projection is not available over a wireless LAN. This feature is available with the following number of projectors and layout patterns. The projector you assign as the Primary projector, identified in the layout pattern as [ 1 ], always projects the upper-left image. Set up the projectors as follows. 1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries. Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Secondary]. Complete this setting on each Secondary projector 4 Configure one projector as the Primary projector. ( 1 ) Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Primary]. (2) Configure the following settings in [PC-free multi projection].

Pages [Next]