| Search Results |
 |
Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors - DR-M1060 / DR-M1060 II
|
When paper jams and skewed documents are detected during scanning, the following error codes are displayed in the scanner's display panel and scanning is interrupted. Paper jam error code Skew, staple, or feed error detection error code.
|
|
|
Clearing a Paper Jam (DR-M160)
|
When paper jams and double feeds are detected during scanning, the following error codes are displayed in the scanner's display panel and scanning is interrupted. Be careful when removing jammed paper, take care not to cut your hand on the edges of the paper. Remove any documents that have been left in the feed tray.
|
|
|
Common Problems and Solutions - Memory becomes insufficient and scanning stops.. (DR-M1060)
|
Common Problems and Solutions If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through / Remove Background] if they are set to on.
|
|
|
Names and Functions of Parts - DR-M140II
|
Operating Panel Displayed Error Codes
|
|
|
Names and Functions of Parts - DR-M1060 / DR-M1060 II
|
Operating Panel Displayed Error Codes
|
|
|
Error: Scan Mode is not Selected (CaptureOnTouch)
|
To correct this error , follow these steps to scan using CaptureOnTouch ( v 3 or v 4): 1. Select the Document. 2. Select your output.
|
|
|
Function Restrictions Depending on the Mode Setting - DR-M140II
|
Black and White O Error Diffusion O Advanced Text Enhancement X
|
|
|
Function Restrictions Depending on the Mode Setting - DR-M1060 II
|
Black and White O Error Diffusion O Advanced Text Enhancement X
|
|
|
How to enable Skew Detection on my DR-M140II Scanner
|
Open the scanner driver's Detail Settings screen. Click the [ Error Detection] tab. Select the [Skew Detection] check box.
|
|
|
Detecting a document double feed on my DR-M140II Scanner
|
Open the scanner driver's Detail Settings screen. Click the [ Error Detection] tab. Select either the [Detect by Length] or the [Detect by Ultrasonic] check box (or both).
|
|
