| Search Results |
 |
Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors - DR-M1060 / DR-M1060 II
|
The " C " error code appears in the operating panel when the upper unit is open. ... When the [Rapid recovery system] check box is enabled in the advanced settings dialog box, you can resume a scanning operation even if it is interrupted by a paper jam by removing the document and resuming from the document that was being fed when the interruption occurred.
|
|
|
Main Features (DR-G1130/G1100)
|
Scanner Features Variety of Scanning Modes The scanner is equipped with six scanning modes: Black and White, Error Diffusion, Advanced Text Enhancement, Advanced Text Enhancement II , 256-level Gray, and 24-bit Color. * Advanced Text Enhancement can clarify scanned text by processing background or foreground colors.
|
|
|
Why are some of the driver settings grayed out on my DR-G2xx0 Series Scanner?
|
Contrast Detect automatically O Black and White O Error Diffusion O Advanced Text Enhancement X Advanced Text Enhancement II O Active Threshold O 256-level Gray O 24-bit Color O (O: Available for setting, X: Not available for setting, or auto)
|
|
|
Specifications (P-215)
|
to 1.4 mm (0.055") for embossed cards Document Feeding Method Automatic Scanning Sensor Contact Image Sensor Light Source LED Scanning Side Simplex/Duplex Scanning Modes Black and White, Error Diffusion, 256-level Grayscale, Advanced Text Enhancement II , 24-bit Color Scanning Resolution 150 x 150dpi/200 x 200dpi/300 x 300dpi/400 x 400dpi
|
|
|
Error Codes for the DR-G2090, G2110, and G2140 scanners
|
Error [P***] Paper jammed in scanner Error [ C ***] Scanner cover is open Error [J***] Paper feed error detected Error [J***] A document was skewed Error [D***] A double paper-feed has occured Error [J*** ] Staple was detected Error [J***] Dust was detected Error [U***] The count does not match Error [E***] Scanner hardware problem
|
|
|
Error "Cannot load driver" when using the DR-C225W
|
If you are connected via USB and receive this message, make sure the Wireless button on the back of the scanner is set to "OFF". By default, it is set to "ON" and you will receive this error message if trying to use the scanner via USB.
|
|
|
Names and Functions of Parts - DR-M140II
|
Operating Panel Displayed Error Codes
|
|
|
Names and Functions of Parts - DR-M1060 / DR-M1060 II
|
Operating Panel Displayed Error Codes
|
|
|
ScanGear Starter EX - Advanced Mode Tab Output Settings (macOS) - LiDE 120 / LiDE 220
|
Output Settings Save up to 10 items for each destination. An error message appears when you enter a value outside the setting range. Enter a value within the range displayed in the message.
|
|
|
Common Problems and Solutions (DR-C130)
|
Common Problems and Solutions If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Please change prevent bleed through and remove] if they are set to on.
|
|
