| Search Results |
 |
Scanning with the Scanner on the Stand (LiDE 500F)
|
Scanning on the Stand - CanoScan LiDE 500F Close the document cover. The document cover contains a magnet to help it stick to the scanner body.
|
|
|
Setting up the scanner to scan film (8400F)
|
Setting up the Scanner to Scan Film Always put the protective sheet back in place when you are not scanning films. This will help to protect the light source under the document cover .
|
|
|
Setting up the scanner to scan film (9950F)
|
Setting up the Scanner to Scan Film Always put the protective sheet back in place when you are not scanning films. This will help to protect the light source under the document cover .
|
|
|
Setting up the scanner to scan film (9900F)
|
Setting up the Scanner to Scan Film When you have finished scanning, fit the holes at the bottom end of the protective sheet over the tabs at the bottom of the document cover and slide the protective sheet down. Repeat the procedure for the top end. This will help to protect the light source under the document cover .
|
|
|
How do I clean the scanning glass and rollers in my scanner?
|
... rollers regularly will help prevent possible image ... ... Remove the Top Cover . ... the Right Maintenance Cover open to the ... ... open the Maintenance Cover , clean it ... ... the Left Maintenance Cover open to the ... Remove the Roller Cover . ... As shown in the figure, release the hook (1) (left bottom) and hook (2) (right top toward the back) of the roller cover , and then lift up the cover . This will allow you to remove the cover . ... Close the Left Maintenance Cover . Replace the Roller Cover . Close the Right Maintenance Cover . Carefully replace the Top Cover .
|
|
|
Clean and Sanitize Your Printer and Scanner Equipment
|
For cleaning and to help sanitize Canon PIXMA, MAXIFY, WG-Series and Finetech Printers as well as CanoScan Scanners, we recommend the following. ... Turn the device’s power off and unplug from power source and/or remove the battery (for mobile printers).
|
|
|
What type and sizes can I scan with my DR-S250N scanner?
|
When scanning multiple documents of different sizes, place the documents so that they cover the entire span of the feed rollers by aligning the centers and leading edges of the documents. ... For details, refer to the Help of the scanner driver.
|
|
|
Unable to scan with the DR-C225W / C225W II on macOS 11 (Big Sur) using Wi-Fi
|
If you are experiencing difficulties using the DR-C225W or DR-C225W II wireless (via Wi-Fi ) on macOS 11 (Big Sur), please follow the steps listed below.
|
|
|
How do I connect my DR-S150 scanner to a Wi-Fi network?
|
Use the Wireless Connection Tool to automatically acquire the required network information from the wireless settings of the computer connected to the access point, and connect the DR-S150 to the same network. Follow the steps listed below to successfully connect your scanner to a wireless ( Wi-Fi ) network.
|
|
|
Wi-Fi Connection using a Specified Access Point
|
Connecting to a Specified Access Point To connect the scanner to a computer via an access point that does not support WPS, select the access point for wireless connection from a list. - If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to this scanner. - To ensure good Wi-Fi communications, perform this procedure with the scanner initially located close to the access point.
|
|
