| Search Results |
 |
What type and sizes can I scan with my DR-S250N scanner?
|
... 27 to 209 g /m2 ... ... 27 to 255 g /m2 ... ... sheets (80 g /m2 ... ... sheets (80 g /m2 ... Business Card ... 128 to 255 g /m2 ... ... stack of business cards cannot be fed ... the number of cards in the stack ... Card (plastic) Card thickness: 1 ... ... Loading capacity 3 cards (non- ... ), 1 card (embossed) When scanning cards , place them ... ... If you place cards to be fed ... ... In addition, cards that get jammed ... Embossed cards may not be ...
|
|
|
Use a recommended SCSI card.
|
When using a SCSI expansion card , select one of the following recommended models: - AVA-2915LP (Adaptec) - AVA-2930LP (Adaptec)
|
|
|
Use a recommended SCSI card. (6030C)
|
When using a SCSI expansion card , select one of the following recommended Adaptec models: - AVA-2915 LP (PCI bus) - AVA-2930LP (PCI bus)
|
|
|
Switching the feed and Eject Methods on my DR-M1060 / DR-M1060 II Scanner
|
Remarks Plain paper Either Either Business cards Either Straight path Place cards vertically Plastic cards Either Straight path Place cards vertically Thick paper Either Straight path Thin paper Either Either Bound or fastened paper (e. g . invoices) Non separation feeding Either Long documents Non separation feeding Either Half-folded paper Non separation feeding Either When scanning documents that contain both plain paper and plastic cards, place the cards at the top and use the straight path.
|
|
|
Specifications (P-215)
|
225 g /m2 Thickness 0.15 to 0.3 mm (0.0059 to 0.0118") Card (ISO complaint) Width 86 mm (3.39") Length 54 mm (2.13") Thickness (density) 0.76 mm (0.03") or less Up
|
|
|
Documents (P-215)
|
(34 to 60 lb bond) 0.15 to 0.3 mm (0.0059 to 0.0118") Business card 49 to 55 mm (1.93 to 2.17") 85 to 91 mm (3.35 to 3.58") 128 to 225 g /m² (34 to 60 lb bond)
|
|
|
Documents (DR-G1130/G1100)
|
The scannner can scan documents ranging in size from business cards and checks to 11" x 17"/A3 size.
|
|
|
Installation Requirements (DR-G1130/G1100)
|
Other requirement The USB cable you are using should be the one originally included with the scanner. If the CPU, memory, interface card , and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time. Even if the computer satisfies the recommended specifications, the scanning speed may vary, depending on the specified scan settings.
|
|
|
Clearing a Card Jam
|
If a card jam occurs, try pulling the card out, or open the feeder cover to remove the card .
|
|
|
Placing Cards in the Scanner
|
Follow these steps to place cards in the scanner.
|
|
