| Search Results |
 |
How do I scan folded documents (folio scan) on my DR-S250N scanner?
|
... the document eject tray . ... The document eject tray can be adjusted ... ... the document eject tray according to the ... ... the document eject tray forward according to ... ... the document eject tray locks the angle of the tray , so the ... ejected onto the tray are aligned. ... folded properly, paper jams may occur ... For details, refer to the Help of the scanner driver. ... Set [Page Size] to half the size of the paper you are actually going to scan on the scanner driver settings screen. ... For details, refer to the Help of the scanner driver.
|
|
|
Cleaning the scanning glass and transport rollers (DR-2080C)
|
Turn the power off and unplug the power cord from the power outlet. Open the paper feed tray . While squeezing the OPEN release, open the front unit towards you.
|
|
|
Clearing a Paper Jam (DR-F12)
|
When removing jammed paper, take care not to cut your hands on the edges of the paper. 1 . Remove any documents from the document feed tray and the document eject opening. 2. Open the feeder cover to check for jammed paper.
|
|
|
Clearing a Paper Jam
|
Clearing a Paper Jam When removing jammed paper, take care not to cut your hands on the edges of the paper. 1 Remove any documents that have been left in the eject tray . 2Press the OPEN knob from sides, and pull the front unit out and downward to open it.
|
|
|
Document Feed and Eject Trays
|
Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.
|
|
|
Imprinter Testing
|
Imprinter Testing Before performing an Imprinter Test, load a sheet of paper into the Document Feed Tray . Performing an Imprinter Test Use the following procedure to execute the Imprinter Test.
|
|
|
Feeding documents with the Page Separation Mode on the DR-6010C.
|
If feeding stops due to a system error or paper jam while the scanner is scanning, resolve the problem, make sure that the scanned image of the last page that was successfully fed has been stored, and then resume scanning the remaining document pages. Note that documents that are printed on thin paper may fall out of the document eject tray . After you finish scanning, close the document feed tray and the document eject ray extension to prevent damage to the scanner while it is not being used.
|
|
|
Setting the Long Document Mode on my DR-M1060 II Scanner
|
Be careful when scanning paper that is longer than A3 or letter (LTR) size or thin paper , as the documents may fall off of the eject tray after scanning. Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [Canon DR-M1060II], and [Canon imageFORMULA Utility].
|
|
|
Setting the Long Document Mode on my DR-M140II Scanner
|
Be careful when scanning paper that is longer than A4 or letter (LTR) size or thin paper , as the documents may fall off of the eject tray after scanning. The maximum length of documents that can be scanned in the Long Document mode varies depending on the scanning resolution. - 300dpi: 5,445 mm (214")
|
|
|
Names and Functions of Parts (DR-C130)
|
Paper Eject Stopper The paper eject stopper prevents scanned documents from sliding off the eject tray . Use the paper eject stopper that corresponds to the length of the documents you want to scan.
|
|
