| Search Results |
 |
What type and sizes can I scan with my DR-S250N scanner?
|
Business Card Paper thickness 128 to 255 g ... ... stack of business cards cannot be fed ... the number of cards in the stack ... Card (plastic) Card thickness: 1 ... ... Loading capacity 3 cards (non- ... ), 1 card (embossed) When scanning cards , place them ... ... If you place cards to be fed ... ... In addition, cards that get jammed ... Embossed cards may not be able to be scanned correctly, depending on the type of embossment. When scanning cards , make the following setting on the scanner driver settings screen. ... For details, refer to the Help of the scanner driver.
|
|
|
System requirements for the DR-6030C.
|
- Memory: 512 MB or more ... Use the following recommended SCSI cards with the scanner: SCSI cards made by Adaptec (for PCI bus) ... SCSI cards made by RATOC Systems (for Card bus)
|
|
|
Use a recommended SCSI card.
|
When using a SCSI expansion card , select one of the following recommended models: - AVA-2915LP (Adaptec) - AVA-2930LP (Adaptec)
|
|
|
Use a recommended SCSI card. (6030C)
|
When using a SCSI expansion card , select one of the following recommended Adaptec models: - AVA-2915 LP (PCI bus) - AVA-2930LP (PCI bus)
|
|
|
Unable to scan with the DR-C225W / C225W II on macOS 11 (Big Sur) using Wi-Fi
|
If you are experiencing difficulties using the DR-C225W or DR-C225W II wireless (via Wi-Fi ) on macOS 11 (Big Sur), please follow the steps listed below.
|
|
|
How do I connect my DR-S150 scanner to a Wi-Fi network?
|
Use the Wireless Connection Tool to automatically acquire the required network information from the wireless settings of the computer connected to the access point, and connect the DR-S150 to the same network. Follow the steps listed below to successfully connect your scanner to a wireless ( Wi-Fi ) network.
|
|
|
Wi-Fi Connection using a Specified Access Point
|
Connecting to a Specified Access Point To connect the scanner to a computer via an access point that does not support WPS, select the access point for wireless connection from a list. - If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to this scanner. - To ensure good Wi-Fi communications, perform this procedure with the scanner initially located close to the access point.
|
|
|
Unable to connect to DR-C225W or DR-C225W II via Wi-Fi on macOS 10.13 using Network Setting Tool
|
|
Documents (P-215)
|
(34 to 60 lb bond) 0.15 to 0.3 mm (0.0059 to 0.0118") Business card 49 to 55 mm (1.93 to 2.17") 85 to 91 mm (3.35 to 3.58") 128 to 225 g/m² (34 to 60 lb bond)
|
|
|
Clearing a Card Jam
|
If a card jam occurs, try pulling the card out, or open the feeder cover to remove the card .
|
|
