| Search Results |
 |
Wi-Fi Connection using the WPS Function
|
Connecting using the WPS Function 6. Perform steps 1 to 3 as shown on the screen. (1) Turn off the WIRELESS switch on the rear of the scanner.
|
|
|
Wi-Fi Connection using a Specified Access Point
|
Connecting to a Specified Access Point 5. Click [Next]. 6. Perform steps 1 to 3 as shown on the screen. (1) Turn off the WIRELESS switch on the rear of the scanner.
|
|
|
How do I make an ad-hoc (one-to-one) connection between the WA10 and a computer (or smart device equipped with wireless LAN capability)?
|
The WA10's factory default setting is AP mode. Search for the wireless network, and establish Wi-Fi connection with the WA10. 1) Click the
|
|
|
What are the features of the P-208 doucment scanner?
|
Features of the Scanner Equipped with Feeder Up to 10 pages of a document can be loaded and then fed continuously, or one at a time. Wi-Fi connectivity
|
|
|
I've lost (misplaced) my discs, where can I get CapturePerfect?
|
If you lost (or misplaced) your original discs, please call 1 -800-423-2366, Monday through Friday from 10:00 a.m. to 6:00 p .m., E.T. and one of our agents will be happy to assist you with obtaining another copy of CapturePerfect.
|
|
|
Specifications (P-215)
|
Here are the specifications for the P -215 mobile scanner.
|
|
|
Wi-Fi Connection using the AP Mode
|
Connecting using the AP Mode To connect one -to- one with a wireless LAN-equipped computer, set this scanner to the AP mode. 1 . If the scanner is on, turn it off. ... 2. Turn on the AP switch and the Wireless switch on the rear of the scanner. 3 . Turn on this scanner. ... ( 1 ) Click the ... ( 3 ) Enter the security key from step 2 in the screen that appears, then click [OK]. ( 1 ) Click the
|
|
|
Unable to scan with the DR-C225W / C225W II on macOS 11 (Big Sur) using Wi-Fi
|
Once you have downloaded and installed the 3 files listed above (step 2), locate the "Network Setup Tool" in your Application folder and run it. ... You want to select the one that has the serial number and IP address added onto the scanner name.
|
|
|
How do I connect my DR-S150 scanner to a Wi-Fi network?
|
Check the icon on the top right corner of the scanner touch panel. If you cannot connect properly, please check your access point (router) settings and repeat steps 1 -6 again. This completes setup.
|
|
|
How do I connect my R50 scanner to a Wi-Fi network?
|
Once you download the Zip file, and install the driver, you can go to your task bar icon for "CaptureOnTouch", right-click on it and select "Select Scanner". Choose the R50 from the list (the one that contains the Mac address after the R50 name), and then you are ready to scan.
|
|
