Connecting using the AP Mode Press and hold the power button until the indicator goes out. 2 . Turn on the AP switch and the Wireless switch on the rear of the scanner. 3. Turn on this scanner.
Connecting to a Specified Access Point Press and hold the power button unitl the indicator goes out. 2 . Enable the wireless LAN function of the computer. This step is not necessary if the wireless LAN function is already enabled.
and Network Connection Utility https://www.usa.canon.com/internet/portal/us/home/support/details/scanners/document-scanner/imageformula-dr-c225w-ii/imageformula-dr-c225w-ii-office-document-scanner?subtab=downloads-software Once you have downloaded and installed the 3 files listed above (step 2 ), locate the "Network Setup Tool" in your Application folder and run it.
Hold the Wireless On/Off button while turning the WA10 on to start it up in AP mode. ... Hold the Wireless On/Off button until the Connection lamp lights orange. ... Search for the wireless network, and establish Wi-Fi connection with the WA10. ... 2 ) Select the SSID from step 2 in the list, then click [Connect].
... 216 mm ( 2 " to 8 ... ... g/m 2 (7 to ... ... g/m 2 (7 to ... ... g/m 2 (22 lb ... ... g/m 2 (22 lb ... Width: 50 mm to 55 mm ( 2 " to 2.2") ... Paper thickness 128 to 255 g/m 2 (34 to 67.8 lb bond) 0.15 mm to 0.3 mm (0.00591" to 0.0118") ... For details, refer to the Help of the scanner driver.
Use the Wireless Connection Tool to automatically acquire the required network information from the wireless settings of the computer connected to the access point, and connect the DR-S150 to the same network. Follow the steps listed below to successfully connect your scanner to a wireless ( Wi-Fi ) network.
Features of the Scanner Equipped with Feeder Up to 10 pages of a document can be loaded and then fed continuously, or one at a time. Wi-Fi connectivity
