- CaptureOnTouch for Mac and Network Connection Utility https://www.usa.canon.com/internet/portal/us/home/support/details/scanners/document-scanner/imageformula-dr-c225w-ii/imageformula-dr-c225w-ii-office-document-scanner?subtab=downloads-software
Use the Wireless Connection Tool to automatically acquire the required network information from the wireless settings of the computer connected to the access point, and connect the DR-S150 to the same network. Follow the steps listed below to successfully connect your scanner to a wireless ( Wi-Fi ) network.
Connecting to a Specified Access Point To connect the scanner to a computer via an access point that does not support WPS, select the access point for wireless connection from a list. - If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to this scanner. - To ensure good Wi-Fi communications, perform this procedure with the scanner initially located close to the access point.
How to Connect Smart Devices 3. Turn on this scanner. 4. From the smart device [Settings], tap [ Wi-Fi ] to confirm that it is enabled. 5. For the network selection, select the SSID from step 2.
Features of the Scanner Equipped with Feeder Up to 10 pages of a document can be loaded and then fed continuously, or one at a time. Wi-Fi connectivity
Connecting using the AP Mode Press and hold the power button until the indicator goes out. 2. Turn on the AP switch and the Wireless switch on the rear of the scanner. 3. Turn on this scanner.