Ask a Question
FiltersClear
CMS-CATEGORY_REF
CANON (8)
Content Source
Articles (8)
Products
imageFORMULA DR-6010C Production Scanner (8)
 
 
Search Results
CMS-XML Connecting the DR-6010C using SCSI
There are two methods for connecting the DR-6010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. ... The SCSI ID of the scanner is set to "SCSI ID =2" by default. When using a daisy-chain configuration with other SCSI devcies, set the DIP switches so that there is no duplication of SCSI ID numbers in the system.
CMS-XML Use a recommended SCSI card.
When using a SCSI expansion card , select one of the following recommended models: - AVA-2915LP (Adaptec) - AVA-2930LP (Adaptec)
CMS-XML Scanning speeds are lower if your computer's USB interface is not Hi-Speed USB 2.0.
- Hard disk: 1 GB or more available space - Interface: USB port present as standard equipment on the computer (Hi-Speed USB 2.0) or SCSI expansion card - Monitor: Resolution of 1024 x 768 (XGA) or better
CMS-XML Check the size, thickness, and weight of the document.
The scanner can scan documents ranging in size from business cards and checks to A4 size documents. It can also scan long documents up to 39.2" (1000mm).
CMS-XML Check the SCSI IDs of all SCSI devices connected to the system (6030C)
Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner.
CMS-XML Connecting the DR-6010C using USB
There are two methods for connecting the DR-6010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. Do not connect a USB cable and SCSI cable at the same time. Follow these steps to install the scanner using the USB connection:
CMS-XML The scanner is not recognized when connected by USB.
If you have verified that the cable is the one that came with the scanner and is functioning properly, it is possible that the Windows assigned USB ID has become corrupted and needs to be reset. To do this, please download (and run) the "Restoration Tool for Windows Registry" (located under the "Utilities" tab of "Drivers & Downloads" on the scanner product page).The function of this tool is to reassign the USB ID's to the correct scanners.
CMS-XML Before Using Kofax VRS
Restrictions when Using KOFAX VRS For further details on settings and features for KOFAX VRS, refer to "VRS User Guide.pdf" or the KOFAX VRS help file stored on the CD-ROM.