| Search Results |
 |
Not enough memory to execute scanner settings
|
ScanFront uses memory to scan documents. This memory usage differs according to conditions such as document size and resolution. When setting scanning conditions that require a large amount of memory capacity, an error message saying "Not enough memory to execute current scanner settings" may appear and you may not be able to scan the document.
|
|
|
During scanning, an unknown error occurs.
|
If you receive an unknown error while scanning, it may be that the scanner is having trouble communicating with the computer.
|
|
|
Error: Invalid Password when attempting to log into the ScanFront 400.
|
While attempting to log into the ScanFront 400, you receive the error : Invalid Password (even after validating your entry several times).
|
|
|
Replacing the Rollers and Document Holding Guide (SF-300 Series)
|
When the rollers start to wear out, document feed errors such as paper jams are more likely to occur.
|
|
|
Cannot turn on the power. (SF-300 Series)
|
Check the connections of the AC adapter and power plug. If the problem is not resolved after checking the connections, contact your local authorized Canon dealer.
|
|
|
Once the firmware has been updated, create a new administrator password.
|
If, for some reason, the administrator password has been forgotton, then the only way to resolve it is to update the firmware in the scanner. Once the firmware has been updated, create a new administrator password.
|
|
|
How to recover from Web Application Mode on the ScanFront 400.
|
When your ScanFront 400 boots up in Web Application mode, and you have not defined the web address it requires, you will be prompted with a window indicatiing the following error : Warning A network error has occured.
|
|
|
Replace the rollers. (SF220/220P)
|
Do not use excessive force when removing or attaching the retard or feed rollers. Doing so may cause the rollers to become deformed, resulting in feed errors .
|
|
|
Paper becomes jammed because the rollers are dirty.
|
Do not use excessive force when removing or attaching the retard roller. Doing so may cause the roller to become deformed, resulting in feed errors .
|
|
|
Clean the scanning glass. (SF220/220P)
|
Scratches on the scanning glass may cause streaks on scanned images, as well as feeding errors . If there are scratches on a scanning glass, contact your authorized Canon dealer.
|
|
