| Search Results |
 |
Proof of Purchase Guidance for imageCLASS devices
|
You may either fax or ... FAX Number : (757) 579-7198 ... This will assist us in validating the receipt in our system.
|
|
|
PC Faxing from a Mac (imageCLASS Fax driver)
|
This article explains the basic procedure for displaying the settings screen of the driver and sending a fax from an application.
|
|
|
Registering One-Touch Speed Dialing-ICMF 6500
|
Registering One-Touch Speed Dialing Confirm that [1-TOUCH SPD DIAL] is displayed, then press <OK>. Press a one-touch speed dialing key (01 to 23) for a registering fax number , then press <OK>. You can also select one-touch speed dialing number with <
|
|
|
Maximum number of jobs that can be stored
|
Maximum number of jobs that can be stored Based on the condition that the other party sends the fax by the MF6550/6560/6580 (including CX models) with ITU-T No.1 Chart standard mode.
|
|
|
Suggestions for tracking number of copies.
|
Even though this unit does not have a copy counter, here are several suggestions that might prove useful in trying to keep track of the number of copies made (yield) on the copier. Note: If your copier also acts as a fax machine , every fax and report that it prints counts as a copy (toner is being used). Also, if you have the copier connected to a computer and use it as a printer, every page printed is also a copy.
|
|
 |
User Support Tool
|
1 Make Sure That the Processing/Data Indicator Is Off Make sure that the Processing/Data indicator on the operation panel of the machine is off. If the indicator is lit up or blinking, wait until the machine finishes all of its operations (copying, printing, sending faxes , etc.).
|
|
|
Cleaning of imageCLASS Products
|
For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:
|
|
|
Checking and Deleting Copy Jobs-ICMF 6500
|
Checking and Deleting Copy Jobs System monitor enables you to view the transmission and reception results, monitor the status of the copy, fax , print, jobs currently being processed.
|
|
|
Set the Output Method in Printing Preferences to Print.
|
Set the Output Method in Printing Preferences to Print. 1. Go to Printers and Faxes . 2. Right click the printer and left click on properties. 3. Left click on Printing Preferences.
|
|
|
Adding a Printer via USB (imageCLASS/ Faxphone Driver MF Printer Driver 10.2.0)
|
1. Open [System Preferences] ? click [Print & Fax ], [Print & Scan], or [Printers & Scanners].
|
|
