Setting Sender Information

About Sender Information

If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax.

1. Date and time of transmission

2. Unit fax/telephone number

3. Unit name

4. The registered recipient's name is printed when sending faxes.

5. Page number

Note

• You can print USER'S DATA LIST to confirm the sender information you have registered.

  • Summary of Reports and Lists

• When sending faxes in black & white, you can select whether to print the sender information inside or outside the image area.

  Specify the setting on TTI position in Advanced FAX settings under FAX settings.

  • Advanced FAX settings

• You can select the date print format from three formats: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.

  Select the date print format on Date display format under Device user settings.

  • Device user settings

Setting Date and Time

This section describes the procedure to set the date and time.

1. Make sure that printer is turned on.

2. Select Setup on HOME screen.

   • Using the Operation Panel

3. Select Device settings, and then press OK button.

4. Select Device user settings, and then press OK button.

5. Select Date/time setting, and then press OK button.

6. Set date and time.

   Use the button to move the cursor under the desired position, and then use the button to enter the date and time.

   

   Enter the date and time in 24-hour format.

   Enter only the last two digits of the year.

7. Press OK button.

8. Press HOME button to return to HOME screen.

Setting Daylight Saving Time (Summer Time)

Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year.

You can set your printer to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends.

Important

• Not all the latest information of all countries or regions is applied for Daylight saving time setting by default. You need to change the default setting according to the latest information of your country or region.

Note

• This setting may not be available depending on the country or region of purchase.

1. Make sure that printer is turned on.

2. Select Setup on HOME screen.

   • Using the Operation Panel

3. Select Device settings, and then press OK button.

4. Select Device user settings, and then press OK button.

5. Select Daylight saving time setting, and then press OK button.

6. Select ON, and then press OK button.

   To disable summer time, select OFF.

7. Set date and time when summer time starts.

   1. Set date when summer time starts.

      Use the button to change the setting item, use the button to change the setting, and then use the OK button to confirm the selection.

      

   2. Set time (in 24-hour format) when summer time starts.

      Use the button to move the cursor under the desired position, use the button to enter the time, and then press the OK button.

      Precede single digits with a zero.

      

8. Set date and time when summer time ends.

   1. Set date when summer time ends.

      Use the button to change the setting item, use the button to change the setting, and then use the OK button to confirm the selection.

      

   2. Set time (in 24-hour format) when summer time ends.

      Use the button to move the cursor under the desired position, use the button to enter the time, and then press the OK button.

      Precede single digits with a zero.

      

9. Press HOME button to return to HOME screen.

Registering User Information

This section describes the procedure to register the user information.

Note

• Before sending a fax, be sure to enter your name and fax/telephone number in Unit name and Unit TEL on the User information settings screen (for US only).

1. Make sure that printer is turned on.

2. Select Setup on HOME screen.

   • Using the Operation Panel

3. Select Device settings, and then press OK button.

4. Select FAX settings, and then press OK button.

5. Select FAX user settings, and then press OK button.

6. Select User information settings, and then press OK button.

   The screen to register the unit name and the unit fax/telephone number is displayed.

   

7. Enter unit name.

   1. Move cursor to Unit name.

   2. Enter unit name.

      

   3. Press OK button.

   Note

   • You can enter the name up to 24 characters, including spaces.

   • For details on how to enter or delete characters:

     • Entering Numbers, Letters, and Symbols

8. Enter unit fax/telephone number.

   1. Move cursor to Unit TEL.

   2. Enter unit fax/telephone number.

      

   Note

   • You can enter the fax/telephone number up to 20 digits, including spaces.

   • For details on how to enter or delete characters:

     • Entering Numbers, Letters, and Symbols

9. Press OK button to finalize registration.