2 . Touch the SSID that matches the one displayed on the camcorderâ s screen in step 4 of 'Step 1: Performing Camcorder Settings' above. 3. Enter the password displayed on the camcorderâs screen from step 4 of 'Step 1: Performing Camcorder Settings' above to establish a connection.
In the computerâ s Wi-Fi settings, choose the SSID (network name)( ) displayed on the camera to establish a connection. In the password field on the computer, enter the password (
1. Camera's Wi-Fi is set to [Enable] If [Built-in wireless settings]' s [ Wi-Fi /NFC] is set to [Enable] under [ Connecting the Camera to a Computer using a USB Cable (EOS 5D Mark IV).
The instructions here assume you already have a correctly configured and working network, network device( s ) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network devices you want to use.
With a Wi-Fi connection to EOS Utility established, certain functions are unavailable. The Wi-Fi connection will be terminated if you set the cameraâ s power switch to <OFF> or open the card slot/battery compartment cover.
Step 1: Preparing necessary items 1. Check the computer` s requirements. For the computer environments supporting Wi-Fi connection function, refer to the Related Information section at the end of the page.
Even if your computer is connected to an access point, images sent from the camera to the computer requires some changes in the computer` s settings. The procedures are explained below.