| Search Results |
 |
Delete Print Jobs From the Queue - Windows XP or 2000
|
Learn how to delete print jobs from the print queue to resolve printer errors in Windows XP and Windows 2000.
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
|
To resolve the error shown below , right-click Print Spooler service and then select Start.
|
|
|
Reset the printer power cord BJC-Printers
|
Printer has solid orange light. Printer does not respond. After 20 or 30 seconds, re-connect the power cord, and power the printer on. The error should be resolved at this point.
|
|
|
Clearing jam from inside the machine L170
|
Clearing jam from inside the machine Be sure to push the paper release levers back to their original position. If the levers are left pushed down, the paper jam error will not be resolved .
|
|
|
Resolve Beeps or Error Codes on a BJC-7000 or BJC-8000 Printer
|
If you have an error on your machine, count the number of beeps, then refer to the table below for solutions .
|
|
|
Responding to Error Messages
|
- Operation Panel - GARO Status Monitor (Wndows) Follow the procedures outlined in your User Manual to confirm and solve problems indicated by the messages.
|
|
|
When clicking the [Add] button, an error message may be displayed.
|
When using the ExtraKit and Mac OS 10.5 and with the registration of the Bonjour connection, when clicking the [Add] button, an error message may be displayed and unable to be added. [ Solution ]
|
|
|
BJC-4000 Error Codes - Beeping Flashing Lights
|
Error Conditions for the BJC-4000Error Condition On Line HS HQ Error Beeps Paper Misfeed Off ..... On 3 Times Paper Out Off On 3 Times Paper Jam Off On 4 Times Controller Error Off Blinks Blinks On 3 or More If the ERROR light comes on and the ON LINE, HS, and HQ lights are blinking, a controller error may of occurred. Follow these steps to try a resolve the problem: a. Press POWER button to turn off the printer then unplug the power cord.
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error Solution : 1) Open the win.ini file and make sure that under the [PrinterPorts] and [Devices] sections the Canon printer model being installed is mentioned in a line that will read something like: [Devices]
|
|
|
Fixing ZoomBrowser EX 2.xx "corrupted database" or "E_Fail" error message.
|
ZoomBrowser EX is giving a ?corrupted database? or ?E_Fail? error message. How can I fix this? 7. Reinstall the ZoomBrowser EX program from the Canon PowerShot Solutions CDROM which came with your camera. (See the Software Starter Guide which came with your PowerShot camera for installation procedures).
|
|
