Rendering Subsystems may be causing a 'Windows was unable to print the test page' error Solution : 1) Open the win.ini file and make sure that under the [PrinterPorts] and [Devices] sections the Canon printer model being installed is mentioned in a line that will read something like: [Devices]
Error : Cannot Detect Cartridge Type (Windows 95/98 and Windows Me) ... The error "Cannot Detect Cartridge Type" occurs when the printer driver cannot communicate well enough with the printer to determine the type of cartridge installed. ... Follow the suggestions below to resolve the issue. 1. Make sure the printer is powered on and that no error conditions exist (flashing lights or beeps).
The File Size of the Scanned Image is Too Large The issue you are experiencing can be resolved in two ways: 1. Lower the scanning resolution. The lower the resolution the smaller the file size.
Ink Absorber Replacement Options Over the life of the printer, the amount of ink that the ink absorber has absorbed is calculated by the printer. Eventually, after substantial use, the printer will enter an error condition when the ink absorber is nearly full. At this point, printing is still possible by pressing the <Resume> button on the printer.
Printer attempts to print but no ink is on the paper. For the BC-20 and BC-22e: If the print head cleanings do not improve the output, you may need to replace the entire ink cartridge. For the BC-21e: If the print head cleanings do not improve the output, you may need to replace the BCI-21 black or BCI-21 color ink tank. If replacing the BCI ink tank and performing print head cleanings does not resolve the issue, you may need to replace the entire BC-21e cartridge.