| Search Results |
 |
Resolve Beeps or Error Codes on a BJC-7000 or BJC-8000 Printer
|
The printer beeps and the error light is orange If your product issue isn't resolved after following the steps above, or if you require additional help , please create or log in to your to see your additional options.
|
|
|
Some Printing Options in My Image Garden are Missing (Mac)
|
If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Print "Help" by selecting "Print the selected topic".
|
When trying to print Help by selecting "Print the selected heading and all subtopics", the picture is not printed. There is no way to resolve this problem as it is an issue of the OS.
|
|
|
Resolve Printer Software or Installation Issues on Your Computer
|
How to restart your computer If system trouble prevents a restart, use the power switch to turn the PC off, wait a few moments and turn it back on. If you still can't restart the PC, refer to the computer's manufacturer for help .
|
|
|
Printer type becomes [GARO Generic].
|
When using the ExtraKit and Mac OS 10.5, the printer type becomes [GARO Generic] even when adding a printer from [Printer and Fax ]. 2. Select [Print and Fax ]. ... [ Solution ]
|
|
|
When clicking the [Add] button, an error message may be displayed.
|
When using the ExtraKit and Mac OS 10.5 and with the registration of the Bonjour connection, when clicking the [Add] button, an error message may be displayed and unable to be added. 2. Select [Printer and Fax ]. ... [ Solution ]
|
|
|
Verify connections and IS Scan installation
|
One or more of the following should resolve the issue you are experiencing: You may need to contact your computer manufacturer's technical support for assistance .
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
|
To resolve the error shown below , right-click Print Spooler service and then select Start. section, you may need to contact the hardware / software vendor for assistance in either disabling or removing the component.
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error Solution : ... 3) Next, go back to the "Printers" window, enter Microsoft Fax or Bitfax driver properties and, under the "Details" tab, in the box named "Print to the following port", choose either the COM port onto which the modem is installed or, if not known, choose "File".
|
|
|
Sending faxes using Sequential Broadcasting
|
