| Search Results |
 |
How to record still images on a memory card on the GL2.
|
The wireless controller? s PHOTO button has no half-way setting. Press the button fully and the camcorder immediately takes the image.
|
|
|
Fixing ZoomBrowser EX "corrupted database" or "E_Fail error" message for EOS D30, EOS D60, PowerShot A10, A100, A20, A200, A40, G1, G2, Pro 901S, S110, S200, S30, S300, S330, S40, ZR45mc, ZR50mc, and GL2
|
ZoomBrowser EX is giving a ?corrupted database? or ?E_Fail? error message. How can I fix this? Method 2 - Uninstalling and Reinstalling the ZoomBrowser EX Program 1. If it is still running, Exit ZoomBrowser EX.
|
|
|
Installing the DVC Storage Driver in Macintosh
|
How do I install the DVC Storage Driver in Macintosh? 1. Connect the camcorder to an AC outlet. 2 . Attach the supplied USB cable to the computer' s USB port and the camcorder' s USB terminal. 3. Set the camcorder to Card Play (VCR) mode.
|
|
|
How to use an EX series Speedlite with the GL2.
|
The bounce flash on the 420EX and 550EX Speedlites cannot be used with the GL2. The 420EX/550EX/580EX' s multiple Speedlite control and the Speedlite Transmitter ST-E2 cannot be used with the GL2. In dark recording situations, during autofocus, a assist light may be sent out by the Speedlite to illuminate the subject while you hold the camcorder' s PHOTO button halfway down.
|
|
|
How to install the Canon Digital Video Solution software on Macintosh
|
How do I install the Canon Digital Video Solution software on Macintosh? 1. Close any programs that are running. 2 . Place the Canon Digital Video Solution Disk in the computer' s CD-ROM drive. 3. Double-click the CD-ROM
|
|
|
How to connect the GL2 to a television.
|
For higher picture quality, we recommend playing back recordings on a TV with an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal or the Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will be automatically played back in wide screen mode on the TV screen. See your TV or VCR instruction manual for further details.
|
|
|
Playing back or recording to a VCR
|
How do I playback/record to a VCR? The DV Camcorder is supplied with an S -Video cable and a Stereo Video cable. Refer to the "System Diagram" and to the appropriate sections in your manual to determine which cable to use. This will depend on the connectors available on your VCR.
|
|
|
MiniDV/HDV tape recording times
|
HDV/DV recording in SP mode is recorded at a data rate of 25mbps (approx 3.5MB/ s ). This data rate equals approx. 13GB/hr.
|
|
|
How to select the built in microphone recording mode on the GL2.
|
VOICE: When recording a person' s voice. W. SCREEN:
|
|
|
How to digitally output analog audio and video signals (Analog-Digital converter) on the GL2.
|
Connecting the camcorder to your VCR or 8 mm video camera allows conversion of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder' s DV terminal works exclusively as an output terminal.
|
|
