| Search Results |
 |
Procedure for correcting the RPC Server error.
|
Procedure for correcting the RPC Server error .
|
|
|
WFT-E9: Responding to Error Messages
|
Responding to Error Messages 43: Cannot connect to FTP server. Error code received from server .
|
|
|
WFT-E9: Configuring FTP Server Connection Settings
|
Configuring FTP Server Connection Settings ] to proceed to the next screen. If " Error 41: Cannot connect to FTP server " is displayed in step 9, setting [Passive mode
|
|
|
EOS-1D X Mark III: Image Transfer to FTP Servers
|
Configuring FTP Server Connection Settings ] to go to the next screen. If an Error 41 (Cannot connect to FTP server ) is displayed in step 9, setting [Passive mode
|
|
|
Reviewing and editing network settings on the EOS 1Dx Mark III.
|
Editing function settings Enable this setting in network environments protected by a firewall. If an Error 41 occurs (Cannot connect to FTP server
|
|
|
Using EOS Utility 3.x to Send Images to a Computer (Wi-Fi Function) (EOS 80D)
|
However, the IP address and similar settings must be automatically assigned and configured in environments using DHCP servers or access points or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned and configured.
|
|
|
Using EOS Utility 3.x to Send Images to a Computer (Wi-Fi Function)
|
However, the IP address and similar settings must be automatically assigned and configured in environments using DHCP servers or access points or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned and configured.
|
|
|
Sending Images to a Computer Using EOS Utility Ver.3.x (Wi-Fi Function) (EOS 6D)
|
However, this option can only be used in environments using DHCP servers , or access points or routers with DHCP server functionality, such that IP addresses and related settings are assigned and configured automatically. If an error is displayed even though the IP address and related settings should be automatically assigned and configured, select [Manual setting].
|
|
|
Sending images to a computer (Wi-Fi function) (EOS 70D)
|
However, this option can only be used in environments using DHCP servers , or access points or routers with DHCP server functionality, such that IP addresses and related settings are assigned and configured automatically. If an error is displayed even though the IP address and related settings is set to be automatically assigned and configured, select [Manual setting].
|
|
|
WFT-E9: Preparation
|
Preparation For instructions on setting up a computer as an FTP server , refer to the documentation provided with each device or contact the manufacturer. Note that the following operating systems cannot be used because FTP server functionality is not provided. ... Note that even after synchronization, there will be a margin of error between sender and receiver camera times.
|
|
