| Search Results |
 |
Procedure for using Stitch Assist mode PowerShot S80
|
|
Set the AF-assist Beam to [On] - PowerShot Sxx series
|
Set the AF- assist Beam to [On] - PowerShot Sxx series
|
|
|
Be careful not to block the AF-assist Beam with fingers or other items.
|
Be careful not to block the AF- assist Beam with fingers or other items. Try using a tripod or other stable support, and use the camera's self-timer to ensure that nothing is blocking the AF-assist beam.
|
|
|
Procedure for setting white balance PowerShot S80
|
Adjusting the Tone (White Balance) White balance data cannot be set with (Stitch Assist ), but the white data acquired in another mode can be used. The custom white balance will not be canceled even if you reset camera settings to default.
|
|
|
Use a tripod or other stable support
|
Virtually all Canon cameras are fitted with an industry standard 1/4-20 tripod socket to facilitate easy mounting to standard tripods from various manufacturers. A tripod is an excellent way to support the camera with minimal vibration. This helps to ensure the sharpest possible images at shutter speeds far below what can normally be handheld.
|
|
|
Secure Digital (SD) and MultiMedia card compatiblity information.
|
SD / MMC Card Compatibility Information. Canon camera and camcorder models have been designed to be fully compatible with memory cards that adhere to their respective card standards. Below is a chart reflecting the standards supported by our current models. To ensure card compatibility with your camera or camcorder model, please contact the memory card manufacturer for further information and assistance in determining card compatibility.
|
|
|
Check the Firmware Version With the Camera Window Software - PowerShot Cameras
|
Firmware check If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Camera care and maintenance of PowerShot cameras.
|
Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk.
|
|
|
Basic Camera Care (Cleaning)
|
Use a commercially available blower to remove dust from the lens. For hard-to-remove dirt, contact a Canon Customer Support Help Desk. ID: 8201031700_EN_49
|
|
|
Microsoft Windows XP compatibility information for supported Canon digital cameras
|
This model is supported for direct connection downloads using the drivers built into Windows XP Note: For the PowerShot SD430 wireless communication requires Windows XP Service Pack 2 and requires the most current version of ZoomBrowser to operate when Internet Explorer 7 is installed. Canon Download Library
|
|
