| Search Results |
 |
Set RX (Receive) Start Speed to a slower setting (FAX-JX210P)
|
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Sending a fax on the FAX-JX210P
|
Sending Documents If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press <Stop>, then try sending the document again.
|
|
|
Different ways to send a fax (JX210P)
|
If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press [Stop/Reset], then try sending the document again.
|
|
|
Initial Hardware Setup - FAX-JX210P
|
important: If the Holder moves to the right side, close and reopen the Cover to return the Holder to the left. reference: If an error message is displayed on the LCD, refer to .
|
|
|
Fax Error Codes for L120
|
|
Fax Error Codes (L90)
|
|
Remove foreign object from paper feed area (B95)
|
|
Receiving faxes in memory when a problem occurs L170
|
Receiving faxes in memory when a problem occurs The machine will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from printing normally. The LCD will display [RECEIVED IN MEMORY] and a message showing the problem. See below the error messages , their cause and the action you need to take to correct the problem.
|
|
|
Setting Send Result Reports to Print Automatically
|
Transmission failed. If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. 1. Press [
|
|
|
Setting the Paper Size and Type
|
An error message appears or the machine may not perform as expected.
|
|
