Search Results |
|
Reset the power to the device. L90
|
|
Cleaning of imageCLASS Products
For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:
|
|
|
imageCLASS/ Faxphone Firmware Update Instructions
PDF instructions for updating firmware
|
|
|
L100 Menu Map
|
|
Cleaning the scanner components
Cleaning the Scanner Components Disconnect the power cord from the machine. Use hands to gently open the operation panel (it only opens partially). While holding the operation panel open, clean these components:
|
|
|
ERROR LCD "System Error EXXX" (L100)
Turn OFF the power switch, wait 10 seconds, and turn the power switch ON again. If the problem is not solved, turn OFF the power switch, disconnect the power cord, and contact your local authorized Canon dealer or the Canon help line.
|
|
|
Cannot Send a Fax
Cannot Send a FaxID : 8201414200 _ EN _ 1 Solution Has the power switch been just turned ON? Wait a few moments until the machine starts and warms up.
|
|
|
Common Settings Menu L170
Common Settings Menu Description 1.DEFAULT SETTINGS Selects which mode is displayed in the LCD when the power cord is connected, or the AUTO CLEAR
|
|
|
Cannot Send a Fax
If you cannot send faxes, check the following. Has the Power Switch Been Just Turned ON? Wait a few moments until the machine starts and warms up.
|
|
|
Cleaning the Machine
Clean the exterior of the machine and ventilation slots. 1. Turn OFF the power switch, and then disconnect the power cord. 2. Clean the exterior of the machine with a soft, well wrung out cloth dampened with water or a mild detergent that has been diluted with water.
|
|