| Search Results |
 |
Using the internal extender on the EF 200-400mm f/4L IS USM Extender 1.4x
|
Internal Extender Switch When the lens or camera is in operation (during Auto Focus, Image Stabilization*, exposure, continuous shooting, use of the focus preset, power focus operation, etc.). ... Not doing so may result in an error message being displayed (ERR01) and prevent shooting operation. Turn the camera OFF and then ON to clear the error message . ... Not positioning the lever correctly will create shadown in images and cause AF, AE, and other functions to not work properly.
|
|
|
MP-E65mm f/2.8 1-5X Macro Photo: How to I adjust magnification and effective f-number
|
TTL autoexposure metering is possible from 1x to 5x. Select the desired picture -taking mode and check the shutter speed and aperture. ... Since other will be a slight exposure error using AE metering is not recommended.
|
|
|
Setting the exposure on the MP-E 65mm f/2.8 1-5x Macro Photo lens
|
Setting the Exposure with the EOS-1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 1, 1N/DP/HS, and 1V/HS TTL autoexposure metering is possible from 1x to 5x. Select the desired picture -taking mode and check the shutter speed and aperture. ... Since there will be a slight exposure error , using AE metering is not recommended.
|
|
|
Using the Image Stabilizer on the EF 600mm f/4L IS III USM lens
|
MODE 3 Shooting irregularly moving subjects Although image stabilization will operate when usinga tripod, depending on the kind of tripod and shooting conditions, sometimes it may be better to turn off the Image Stabilizer. Although image stabilization will operate when usinga a monopod, depending on the shooting conditions, sometimes the Image Stabilizer may not be fully effective. ... If the STABILIZER switch is set to ON, the Image Stabilizer may introduce errors .
|
|
|
Canon Maintenance Service
|
Dust and other debris are present in all environments and can accumulate on the image sensor, viewfinder or other components of your Canon EOS Digital SLR camera or on your EF lens optics, causing spots or imperfections to appear on your photos.
|
|
|
EOS EF-M : How to set exposure compensation
|
Exposure compensation is used to alter the camera's standard exposure setting. You can make the picture look lighter (increased exposure) or darker (decreased exposure). The exposure compensation can be set up to +/-2 stops in 1/2 stop increments
|
|
|
The Principals of Tilt and Shift on TS-E lenses
|
The Principals of Tilt and Shift By tilting the lens, the lens' optical axis is tilted with regard to the imaging plane, allowing the focusing plane to be tilted.
|
|
|
How to manually focus the lens.
|
The lens must be switched to manual focus (M) on the AF / M selector switch. You can then look through the viewfinder and adjust the focus by turning the manual focus ring and adjusting it till the image is sharp and the green focus indicator ball, in the lower right corner of the viewfinder lights up.
|
|
|
Definition: Macro Lens
|
Macro Lens Macro lenses let us get much closer to a subject than a macro setting on a zoom lens. The optics in macro lenses are also designed to give superb results when shooting close-up pictures .
|
|
|
Using Extenders (Sold Separately) with the EF 600mm f/4L IS III USM lens
|
Extenders Use an extender EF1.4x III or EF2x III to shoot a larger image of a subject. Lens specifications when using an extender are as follows.
|
|
