Canon Knowledge Base

Filters

Search Results

MF9280Cdn/MF9220Cdn Menu Map 5 to 128 Lines ... ... 15, ISO 17 , ISO21 ... 2, ISOL 5 , ISOL6 ... , PC850, PC851, PC852, PC862, PC864, PC866, PC8DN, PC8GRK, PC8TK, PC1004, PIFONT, PSMATH, PSTEXT, ROMAN8, VNINTL, VNMATH, VNUS, WIN30, WINARB, WINBALT, WINCYR, WINGRK, WINL1, WINL2, WINL 5 Custom Paper Size Setting ... X dimension ... ) Print PS Errors ... Error Diffusion

Specifying Paper Size and Type

... jam or printing error may occur. 1-2. Specify the length of the < X > (shorter) side. ... Tap < X >. Input the length of the < X > side using ... 4-1. Specify the length of the < X > (shorter) side. ... Tap < X >. Input the length of the < X > side using ... 5 . Select the paper type. ... 4-2. Specify the length of the < X > (shorter) side. ... Tap < X >. Input the length of the < X > side using

How to Activate Auto Replenishment Service (ARS) on the printer (5 inch touch screen imageCLASS)

screen. If an error message occurs, follow on-screen instructions

Printing on Custom-Size Paper

To register a custom-size paper loaded in the paper drawer 4. Select <Register Custom Paper>. 5 . Select < X > or <Y>, and enter the length of each side. 6. Select <Apply>.

Menu Route Map

Photo Priority, Text Priority Brightness 5 Levels Halftones Gradation, Error Diffusion Default Display Settings Details, Images File Sort Default Settings

Menu Route Map

Off, On Reduce Ghosting 2 Auto Error Skip Off, On Timeout 5 to 15 to 300 (sec.) Personality Color Mode

Menu Route Map

-50.0 to ±0 to +50.0 (mm) Offset Long Edge (Back) -2.00 to ±0 to +2.00 (inches) or -50.0 to ±0 to +50.0 (mm) Auto Error Skip Off, On Timeout 5 to15 to 300 (sec.) Personality Auto, PS, PCL Color Mode Auto (Color/B&W), Color, Black and White

Menu Route Map

-50 0 to ±0 to +50 0 (mm) 50.0 to ±0 to +50.0 (mm) Auto Error Skip*2 Off, On Timeout*2 5 to 15 to 300 (sec.) Personality*2 Auto, PS, PCL Color Mode*2 Auto (Color/B&W), Color, Black and White

Setting the Wireless LAN Using WPS (MF8080/MF8380)

Setting the Machine Using WPS (Push Button Mode) When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks. The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights up. * If an error message appears, press [OK] to close the screen and follow the procedure again from Step 5 . If you cannot detect the access point after retrying, see "."

System Error E###-#### MF630 Series and MF730 Series

For all service errors turn off the main power switch to the unit. Unplug the printer and let it sit for 5 -10 minutes. Plug the printer directly to a wall outlet, and power the printer back on. If the error does not clear, try to update the firmware on the device.

Pages [Next]