| Search Results |
 |
Calibrate the Scanner from a Mac - MX922
|
If scanned images have incorrect colors , calibrating the scanner may help resolve the problem.
|
|
|
Calibrate the Scanner from a Windows PC - MG7720
|
If scanned images have incorrect colors , calibrating the scanner may help resolve the problem.
|
|
|
Send a fax with non-default image resolution or contrast settings - MX922
|
Steps to change the TX image quality settings Photo - Suitable for photographs. Note: When sending a color fax , documents are always scanned in the same resolution (200 x 200 dpi). The image quality (compression rate) is determined by which scan resolution is selected, except that Extra fine and Photo provide the same image quality.
|
|
|
Change the fax settings - MX310
|
TX TERMINAL ID TTI POSITION: Selects the position of the sender information (outside or inside the image area) when sending black & white faxes (Automatically set inside the image area for color faxes ). FAX/TEL NO. MARK:
|
|
|
Change the fax settings (MP530)
|
FAX SETTINGS Prints sender information at the top of each fax you send (The ON/OFF setting may be available depending on the county of purchase). TTI POSITION: Selects the position of the sender information (outside or inside the image area) when sending black & white faxes (Automatically set inside the image area for color faxes ). FAX/TEL NO. MARK: Selects the mark to appear before the fax/telephone number printed on faxes you send.
|
|
|
Scanner specifications MX850
|
Scanner Element CIS (Contact Image Sensor) Color Scanning Resolution
|
|
|
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
|
Reading Tone Curves With ScanGear, scanning images via a scanner is the input, and displaying to a monitor is the output. "Tone Curve" shows the balance of tone input and output for each Channel.
|
|
|
Facsimile (Fax) specifications MX870
|
MX870 Facsimile (Fax) Specifications Approx. 1 minute per page at 33.6 kbps, ECM-JPEG, transmitting from memory ( Canon color fax test sheet) Scanned image processing
|
|
|
Power the unit OFF then ON to automatically Calibrate the scanner
|
Calibrating the Scanner Calibrate the scanner to reproduce correct color tones in scanned images . Calibration may take time depending on your computer.
|
|
|
MX452 Fax settings
|
Setup / Registration / Redial / Dial tone detect / Pause / TTI / Remote RX / Color Transmission / RX Image reduction / ECM / start speed / Auto Print / Auto save / Security control / On-hook setting
|
|
