| Search Results |
 |
Setting up additional computer(s) for use over wireless LAN (Windows / Mac) - MP495
|
Using the Machine from Additional Computers When wireless connection of the machine is complete, it can be used from additional computers on the same network. ... If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. ... 2 . Follow the on-screen instructions to install the software*.
|
|
|
If MP Navigator EX or other scanning application does not start or quits unexpectedly (Mac)
|
If TWAIN scan applications quit unexpectedly when launching or display an error message then quit, move third party data source files from the TWAIN Data Source folder*. *If there is only the Canon Data Source (in the case of network-capable models, there will be 2 sources), then delete the file( s ) following the steps below, then download and install the latest scanner driver from the Download Library at the Canon USA . Enter the model name of your product in the search box and wait until its name appears under the box. Click the name of the product and then click Get Drivers & Downloads
|
|
|
Wi-Fi Installation Guide (Network Setup) - MP495 / MP499
|
There are several ways to setup your printer to install the wireless LAN software. Refer to the methods listed below and then click on the link for detailed installation instructions. For each setup method, the following items are required. / Wireless Router Computer( s ) connected to the access point / wireless router Internet connection
|
|
|
Snap in ink tank(s) properly MP620 / MP620B
|
Ink Tank Seated Properly 1. Make sure that the power is turned on, and open the Paper Output Tray gently. 2 . Lift the Scanning Unit (Cover) until it stops. The Print Head Holder moves to the replacement position.
|
|
|
Replace ink tank(s) MP620 / MP620B
|
Installing / Replacing Procedure Note Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks.
|
|
|
Adjust the location of network device(s)
|
Network device location For proper wireless communication to occur, it is important that network devices are suitably located. Make sure that:
|
|
|
Replace ink tank(s) MP750 / MP780
|
Use the following procedure to replace empty ink tanks: Make sure the device is powered on. Press the <Open> button (1) to open the Paper Output Tray ( 2 ).
|
|
|
Setting password(s) for PDF files using MP Navigator - MP240 / MP250 / MP270 (Windows)
|
Setting Passwords for PDF Files Set passwords for opening, editing and printing PDF files. You can set two passwords: one for opening the file and one for editing/printing it. Important
|
|
|
Reload document(s) in ADF
|
CHECK DOCUMENT Stack the documents on a flat surface to align the edges of the paper. Insert the top of the document, face up, into the ADF (1) until a beep is heard. Then adjust the document guides to the width of the document ( 2 ).
|
|
|
Replace ink tank(s) MP510
|
Use the following procedure to replace empty ink tanks or when an ink tank error appears. Open the inner cover. Press the ink tank's tab (1), then remove it from the slot ( 2 ). Unpack the ink tank and pull the orange tape off completely in the direction of the arrow and remove the film
|
|
