| Search Results |
 |
How Do I Print With Only the Black or Color Cartridge? (TS202)
|
This article shows how to print using only the black or color cartridge in your PIXMA TS202.
|
|
|
Setting the Ink Cartridge to be Used - TS202 (Windows)
|
Setting the Ink Cartridge to be Used does not function because the printer uses the color FINE cartridge to print documents.
|
|
|
Replacing an Ink Cartridge - TS202
|
Replacing Procedure , in whichever ink remains, only for a while. However the print quality may be reduced compared to when printing with both cartridges. We recommend to use a new ink cartridge in order to obtain optimum qualities. Even when printing with one ink only, print with leaving the empty ink cartridge installed.If either of the color ink cartridge or black ink cartridge is not installed, an error occurs and the printer cannot print.
|
|
 |
TS200 Getting Started
|
2 Insert the Color FINE cartridge into the FINE cartridge holder on the left at a slight upward angle. Push the FINE cartridge in and up firmly until it snaps into place.
|
|
|
What Inks are Compatible with the printer?
|
|
Aligning the Print Head from a Mac - TS202
|
Any error in the print head installation position can cause color and line shifts. Adjusting the print head
|
|
|
Cleaning the Print Head from a Mac
|
cleaning function allows you to clear up clogged print head nozzle Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
|
|
|
Aligning the Print Head from a Windows PC - TS202
|
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. The procedure for performing print head alignment is as follows:
|
|
|
Printing the Nozzle Check Pattern from a Mac
|
The nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
|
|
|
Printing the Nozzle Check Pattern from a Mac - TS202
|
The nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
|
|
